h.264/DVD/DivX player

ne bodimo pikolovski.

<a href="http://localhost:81/udp/239.1.1.9:5000" TVID="1" vod>POP TV</a><br>
<a href="http://localhost:81/udp/239.1.1.8:5000" TVID="11" vod>Kanal A</a><br>	  
<a href="http://localhost:81/udp/239.1.1.7:5000" TVID="111" vod>TV3</a><br>	  
<a href="http://localhost:81/udp/239.1.1.115:5000" TVID="RED" vod>RTV SLO 1</a><br>	
<a href="http://localhost:81/udp/239.1.1.116:5000" TVID="BLUE" vod>RTV SLO 2</a><br>	  

<a href="poptv.jsp" vod="poptv" TVID="1">POP TV</a><br>
<a href="kanala.jsp" vod="kanala" TVID="2">Kanal A</a><br>    

POPTV|0|0|http://localhost:81/udp/239.1.1.9:5000|
KANAL A|0|0|http://localhost:81/udp/239.1.1.8:5000|
TV1000|0|0|http://localhost:81/udp/239.1.1.29:5000|

KANAL A|0|0|http://localhost:81/udp/239.1.1.8:5000|
TV1000|0|0|http://localhost:81/udp/239.1.1.29:5000|
POPTV|0|0|http://localhost:81/udp/239.1.1.9:5000|

Ma kdo kaksno idejo kako usposobiti delovanje IPTV T-2 v kombinaciji ko je popcorn povezan na net prek PCja(Windows S 2003 R3)..

Direktno na linijo z udproxy mi dela ampak ko ga prevezam na PC pa no go..

Ojla folk. Zunaj je nov firmware za HDX 1000. Podpora DTS downmixu!!!

Pa dobr, kda mislijo izdat firmware za egreat 31B, ki bi podpiral DTS? Any news?

This guide is to show how to flash the latest Popcornhour firmware with DTS decoding onto other Networkmedia Tank player.

This has only been tested on ISTAR MINI HDMI 1.3 with the latest firmware but it should work for other and future NMT players as well.

Please upgrade your NMT to the latest firmware before using this.

Be aware, Popcornhour NMT firmware does NOT support VGA.

If you need VGA, DO NOT FLASH THIS FIRMWARE.


Step 1: Install NMT application on your HDD (syb8634.nmt). If you have already installed, skip to step 2. If you don't know how to install NMT, please goto related forum for instructions.


Step 2: Goto SETUP-NETWORK. Write down your NMT player IP address. For example: 192.168.0.187

Step 3: Login onto your NMT's ftp using above IP address with any ftp client software such as cuteftp, the default user name is ftpuser, password is 1234

Step 4: Upload all six files onto NMT's ftp root directory. The root directory usually contain folders such as video,music,podcast,lost+found,photo,download.

Step 5: After the upload. Make all six files properties “Executable”

Step 6: Goto your NMT player Screen,
Choose Media Source
Open the Hard drive which you install NMT application.
Open the fourth File Icon.

Step 7: Open telnet-installer.html and press Run From Hard Disc.
Now the following step is very important, make sure don't power off during the proccess.


Step 8: Goto your PC, open PuTTY.exe
(PuTTy is a free telnet/ssh client, you could download from author’s site
http://www.chiark.greenend.org.uk/~sgta... )
Enter your NMT IP address, choose Telnet and click open.

Step 9: In the PuTTY screen.
Paste this line onto the screen and press enter
/opt/sybhttpd/localhost.drives/HARD_DISK/update.cgi

You should see something like this :

/opt/sybhttpd/localhost.drives/HARD_DISK/update.cgi
./flash: /dev/mtd2: Bad block check not available
Erasing 128 Kibyte @ 460000 -- 14 % complete.

If so, the flash process has begun. First it would erase the current firmware. When it show 100% complete, it means the erasing is done. It will start to write Popcornhour firmware onto your NMT.

Please do NOT power off, do NOT close PuTTy screen or doing anything!
Just wait for your NMT player to restart. This process only takes 5-10 minutes.
After your NMT player restart, you should see the Popcornhour Icon and you are ready to go.

DTS decoding should work.

You also need to re-install the NMT application matching popcornhour’s firmware.


Maybe someone could make an instruction with Graphics.

If you don't like Popcornhour's firmware, it is also possible to flash back to your original NMT firmware.