Forum » Operacijski sistemi » [Linux][Ubuntu] Inštalacija dodatkov na prenosniku
[Linux][Ubuntu] Inštalacija dodatkov na prenosniku
Looney ::
Imam Ubuntu Feisty in prenosni računalnik HEL80. Zraven računalnika sem seveda dobila vse gonilnike. Za Windowse jasno. Zdaj me pa zanima kako se naj lotim inštalacije čitalca pomnilniških kartic, kamere in čitalca prstnih odtisov. Je vse to sploh možno usposobiti na Ubuntu?
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
- spremenilo: CCfly ()
'FireSTORM' ::
čitalec kartic
mogoče je postopek enak kot takrat ko kartico prebiraš direktno iz telefona
torej mountaš drive...
probaj:
dmesg | grep -i "SCSI Device"
in če bo output podoben temu:
root@xendria:~# dmesg | grep -i "SCSI Device"
SCSI device sda: 248321 512-byte hdwr sectors (127 MB)
SCSI device sda: 248321 512-byte hdwr sectors (127 MB)
moraš še samo mountat
mount -t vfat /dev/sda1 /pot/kam/naj/mounta
to delaš kot root in kartica mora biti vstavljena
za tiste ostale stvari pa bi bilo fajn vedeti sploh kateri driveri so to
mislim ime driverja itd itd
za kamero imaš verjetno firewire port
to moraš namestit:
IEEE 1394 driver
fingerprint scanner pa morda tole:
http://www.neurotechnologija.com/vf_sdk...
mogoče je postopek enak kot takrat ko kartico prebiraš direktno iz telefona
torej mountaš drive...
probaj:
dmesg | grep -i "SCSI Device"
in če bo output podoben temu:
root@xendria:~# dmesg | grep -i "SCSI Device"
SCSI device sda: 248321 512-byte hdwr sectors (127 MB)
SCSI device sda: 248321 512-byte hdwr sectors (127 MB)
moraš še samo mountat
mount -t vfat /dev/sda1 /pot/kam/naj/mounta
to delaš kot root in kartica mora biti vstavljena
za tiste ostale stvari pa bi bilo fajn vedeti sploh kateri driveri so to
mislim ime driverja itd itd
za kamero imaš verjetno firewire port
to moraš namestit:
IEEE 1394 driver
fingerprint scanner pa morda tole:
http://www.neurotechnologija.com/vf_sdk...
Those penguins.... They sure aint normal....
Zgodovina sprememb…
- spremenil: 'FireSTORM' ()
Looney ::
Glede čitalca kartic dobivam tole ven:
Glede čitalca prstnih odtisov... tole je prav za določene modele, a ne? (Plus to, da je program plačljiv.)
nina@nina-laptop:~$ dmesg | grep -i "SCSI Device"
[ 4.936000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.936000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.936000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.936000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5641.616000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 5641.640000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
nina@nina-laptop:~$
Glede čitalca prstnih odtisov... tole je prav za določene modele, a ne? (Plus to, da je program plačljiv.)
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
Zgodovina sprememb…
- spremenila: Looney ()
'FireSTORM' ::
nevem nisem gledal
samo preletel bežno
malo sem samo poguglal
probaj zdaj
mkdir /mnt/cards
mount -t vfat /dev/sda1 /mnt/cards
samo...hmz...80GB kartica...i don't think so :D
kaj je to morda kak usb disk?
samo preletel bežno
malo sem samo poguglal
probaj zdaj
mkdir /mnt/cards
mount -t vfat /dev/sda1 /mnt/cards
samo...hmz...80GB kartica...i don't think so :D
kaj je to morda kak usb disk?
Those penguins.... They sure aint normal....
Looney ::
Am, ne, to bo pa kar trdi disk v računalniku.
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
Looney ::
nina@nina-laptop:~$ mount -t vfat /dev/sda1 /mnt/cards
mount: only root can do that
nina@nina-laptop:~$ sudo mount -t vfat /dev/sda1 /mnt/cards
mount: /dev/sda1 already mounted or /mnt/cards busy
mount: according to mtab, /dev/sda1 is mounted on /
nina@nina-laptop:~$
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
Daedalus ::
Butni eno kartico v čitalec, pa poročaj, kaj se zgodi. Zelo verjetno je na USB-ju in ne rabiš posebej podpore.
Drugače za moj, navadni USB čitalec ob priklopu na računalu vrne dmesg | tail tole:
[18231905.480000] usb 4-4: new high speed USB device using ehci_hcd and address 16
[18231905.616000] scsi7 : SCSI emulation for USB Mass Storage devices
[18231905.616000] usb-storage: device found at 16
[18231905.616000] usb-storage: waiting for device to settle before scanning
Daj poženi
dmesg |grep usb-storage, pa nalimaj sem rezultat.
Drugače za moj, navadni USB čitalec ob priklopu na računalu vrne dmesg | tail tole:
[18231905.480000] usb 4-4: new high speed USB device using ehci_hcd and address 16
[18231905.616000] scsi7 : SCSI emulation for USB Mass Storage devices
[18231905.616000] usb-storage: device found at 16
[18231905.616000] usb-storage: waiting for device to settle before scanning
Daj poženi
dmesg |grep usb-storage, pa nalimaj sem rezultat.
Man is condemned to be free; because once thrown into the world,
he is responsible for everything he does.
[J.P.Sartre]
he is responsible for everything he does.
[J.P.Sartre]
Looney ::
Ne, ničesar ne zazna. Drugače meni tudi moj zunanji čitalec kartic takoj zazna. Tega mi pa ne. Tudi lučka, ki označuje, da je kartica vstavljena se ne prižge.
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
kriko1 ::
Potem pa zahteva posebne gonilnike - win hw.
Vseeno, glej izpis dmesg medtem ko vtakneš napravo:
#sudo tail -f /var/log/messages
in podaj izpis sem (tisto kar se zgodi po priklopu naprave).
Vseeno, glej izpis dmesg medtem ko vtakneš napravo:
#sudo tail -f /var/log/messages
in podaj izpis sem (tisto kar se zgodi po priklopu naprave).
Looney ::
Apr 28 08:55:00 nina-laptop kernel: [ 34.584000] Bluetooth: RFCOMM socket layer initialized
Apr 28 08:55:00 nina-laptop kernel: [ 34.584000] Bluetooth: RFCOMM TTY layer initialized
Apr 28 08:55:00 nina-laptop kernel: [ 34.584000] Bluetooth: RFCOMM ver 1.8
Apr 28 08:55:11 nina-laptop gconfd (nina-5844): starting (version 2.18.0.1), pid 5844 user 'nina'
Apr 28 08:55:11 nina-laptop gconfd (nina-5844): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Apr 28 08:55:11 nina-laptop gconfd (nina-5844): Resolved address "xml:readwrite:/home/nina/.gconf" to a writable configuration source at position 1
Apr 28 08:55:11 nina-laptop gconfd (nina-5844): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Apr 28 08:55:11 nina-laptop gconfd (nina-5844): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Apr 28 08:55:11 nina-laptop gconfd (nina-5844): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Apr 28 08:55:20 nina-laptop gconfd (nina-5844): Resolved address "xml:readwrite:/home/nina/.gconf" to a writable configuration source at position 0
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
Looney ::
V Device Managerju sem odkrila naprave. Če komu kaj pove to, je čitalec kartic ENE PCI Card Reader.
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
Daedalus ::
Man is condemned to be free; because once thrown into the world,
he is responsible for everything he does.
[J.P.Sartre]
he is responsible for everything he does.
[J.P.Sartre]
Looney ::
nina@nina-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce Go 7600] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 Generic system peripheral [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)
"#define QUESTION ((bb) || !(bb)) - Shakespeare."
Vredno ogleda ...
Tema | Ogledi | Zadnje sporočilo | |
---|---|---|---|
Tema | Ogledi | Zadnje sporočilo | |
» | Ubuntu ali debianOddelek: Pomoč in nasveti | 1397 (1062) | pikachu004 |
» | Gentoo - problemi z framebuffer in ifconfig (strani: 1 2 )Oddelek: Operacijski sistemi | 4990 (4314) | Zaibatsu |
» | [linux] problem z zvokomOddelek: Operacijski sistemi | 2318 (1565) | overlord_tm |
» | Linux računalnik - router / 2. mrežna ne obstaja?Oddelek: Omrežja in internet | 1633 (1552) | Brane2 |
» | Novi SuSE v10.0 (strani: 1 2 3 )Oddelek: Operacijski sistemi | 9655 (7106) | kriko1 |