slack 10.2 -> 11.0

Je možno. Poglej si UPGRADE.TXT








Slackware 10.2 to 11.0 Upgrade HOWTO



This document explains how to upgrade from Slackware 10.2 to Slackware 11.0



-----------------------------------------------------------------------------





Before you begin, I would strongly recommend making a backup of your

system, or, if not the entire system, at least the /etc directory. You

might find that you need to refer to a few things after the upgrade

process is complete. Back it up, or take your chances.



OK, now that everything is safely backed up, let's proceed. :-)



To do this, you'll need the Slackware 11.0 packages. If these are on a CD,

create a new directory to mount the CD on so that it doesn't get in the

way during the upgrade:



mkdir /packages

mount /dev/cdrom /packages



The packages don't have to be on a CD-ROM, as an alternative you could

copy the slackware directory (the one with the various package

subdirectories in it, basically the "slackware" directory from the install

CD) to someplace like /root/slackware/. The important thing is that you

know where the slackware packages directory is. We'll use /root/slackware

in the following examples.





0. Put your machine in single-user mode:

telinit 1





1. Upgrade your glibc shared libraries. This is important, or things

might go haywire during the first part of the upgrade:



upgradepkg /root/slackware/a/glibc-solibs-*.tgz





2. Upgrade your package utilities:



upgradepkg /root/slackware/a/pkgtools-*.tgz





3. Install sed. You should already have this, but since it's used by

the package utilities it is best to be sure:



upgradepkg --install-new /root/slackware/a/sed-*.tgz





4. Upgrade everything else (and install new packages):



upgradepkg --install-new /root/slackware/*/*.tgz





5. Make sure your system will boot. If you use LILO, make sure the

paths in /etc/lilo.conf point to a valid kernel and then type 'lilo'

to reinstall LILO. If you use a bootdisk, you'll need to use

makebootdisk to make a new bootdisk using the kernel in /boot.





6. Fix your config files. Some of the config files in /etc are going to

need your attention. You'll find the new incoming config files on

your system with the ".new" extension. You may need to fill these in

with information from your old config files and then move them over.



Feel brave? You can use this little script to install all of the

.new config files in /etc. If you've made any local changes you'll

need to add them to the newly installed files. Your old config files

will be copied to *.bak. Anyway, it might be an easier starting

point. Here it is:



#!/bin/sh

cd /etc

find . -name "*.new" | while read configfile ; do

if [ ! "$configfile" = "./rc.d/rc.inet1.conf.new" \

-a ! "$configfile" = "./group.new" \

-a ! "$configfile" = "./passwd.new" \

-a ! "$configfile" = "./shadow.new" ]; then

cp -a $(echo $configfile | rev | cut -f 2- -d . | rev) \

$(echo $configfile | rev | cut -f 2- -d . | rev).bak 2> /dev/null

mv $configfile $(echo $configfile | rev | cut -f 2- -d . | rev)

fi

done



You'll probably also need to edit your /etc/X11/xorg.conf to change

the name of the keyboard driver from "Keyboard" to "kbd". I don't

know why this changed, but it did.





7. Return to multi-user mode:

telinit 3





8. Remove obsolete packages.



If you go into /var/log/packages and take a look at the package list:



ls -lt | less



You may spot some old, obsolete, or discontinued packages. If so,

you can remove these using 'removepkg'.





9. Remove KDE language bloat. By upgrading all packages using

--install-new you've probably installed all of the KDE language

translations from the KDEI series, which will use up about

500MB. If you need only US English, you may remove the KDE

language packs like this:



cd /var/log/packages

removepkg kde-i18n* koffice-l10n*



Even if you need one of these, it might be best to start by

removing them all, and then go back and install the ones you

need with installpkg.







At this point you should be running Slackware 11.0. :-)



I wish everyone good luck with this!



---