suse 9.1 in radeon 9800PRO @ Slo-Tech

Forum » Operacijski sistemi »
suse 9.1 in radeon 9800PRO

suse 9.1 in radeon 9800PRO

jurre :: 29. maj 2004, 14:35

Nalozil sem suse 9.1 (zraven imam se XP-je). Vse deluje lepo, monitor mi prepozna pravi s CDja od monitorja, graficno pa zazna kot radeon R360J (nekaj takega, zgleda po jedru) - pri monitorju lahko kliknes imam disketo, pri graficni pa ne? Osvezevanje je dobro 130hz pri 800x600 resoluciji, ki jo nikakor ne morem zvisati.. Ne gre vec kot 800x600, ce nalozim Ati-jeve gonilnike z njihove uradne strani in resetiram pa ostane pri loadanju v textnem vmesniku..ce napisem startx mi vrze ven cel ekran enih errorjev (neki connection reset by peer, bus nekaj narobe...) in pokaze spet textni vmesnik...
Drugace mi deluje vse bp, samo tista resolucija 800x600 me res moti.

Kaksen nasvet? 0:)

spremenil: jurre (29. maj 2004 ob 14:37)

Skrat :: 29. maj 2004, 16:56

Poglej si malo konfiguracijo v /etc/X11/XF86Config-4

Free software is a matter of liberty, not price.

dragana :: 29. maj 2004, 18:30

poskusi naštimat vesa monitor in to takega z željeno resolucijo in osveževanjem namesto tvojega, vendar pazi, da ne naštimaš frekvence, ki jo monitor ne podpira, ker ga lahko skuriš.

jurre :: 29. maj 2004, 19:54

hm..gledam tole konfiguracijo pa ne vem kaj bi 0:)

bom kar sem pastal, ce kdo kaj pametnega najde (ce z desno kliknem na namizje in kliknem nastavi namizje, potem velikost in orientacija ne gre vec kot 800x600) $:\$

# /.../
# SaX generated XFree86 config file
# Created on: 2004-05-29T19:42:33+0200.
#
# Version: 4.8
# Contact: Marcus Schaefer (sax@suse.de
), 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "speedo"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "sl_SI"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 320 240
HorizSync 28-85
Identifier "Monitor[0]"
ModelName "SYNCMASTER 765MB/715MB SYNCMASTER MAGIC CD175D(P)"
VendorName "SAMSUNG"
VertRefresh 50-160
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059
Modeline "1280x1024" 125.14 1280 1368 1504 1728 1024 1025 1028 1065
Modeline "1280x1024" 145.69 1280 1376 1512 1744 1024 1025 1028 1071
Modeline "1024x768" 116.85 1024 1064 1176 1392 768 753 756 815
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 66.71 800 848 936 1072 600 601 604 635
Modeline "800x600" 73.98 800 848 936 1072 600 601 604 639
Modeline "800x600" 82.55 800 856 944 1088 600 601 604 643
Modeline "800x600" 90.10 800 856 944 1088 600 601 604 647
Modeline "800x600" 90.81 800 856 944 1088 600 601 604 647
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
Modeline "640x480" 57.18 640 680 752 864 480 481 484 517
Modeline "640x480" 62.12 640 680 752 864 480 481 484 521
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "R360 NJ"
BusID "1:0:0"
Driver "radeon"
Identifier "Device[0]"
VendorName "ATI"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Mikrohard :: 29. maj 2004, 21:37

Jah.. to si si pa sam nastavil med instalacijo :P... se da popravit v YAST nadzornem centru.. sam zj ne vem točne poti, ker trenutno nisem v linuxu.. poglej malo.. v nastavitvah za grafično/monitor/resolucijo v YAST2 (ne namizje) moraš obkljukati pravo resolucijo

jurre :: 29. maj 2004, 21:49

hm..pa sm gledal use med instalacijo, pa sem zbral tm 1024, sam je predlagal 1280x1024@16bit, pa sem odznacil tega pa pustil obklukane 1024x768,800x600 pa se neke manjse na 24bit.
ce grem v yast pa ne gre vec kot 800x600, ta je maximalna potem so pa se nizje (640,400,300...) ??

Mikrohard :: 30. maj 2004, 17:24

To mors najdt.. in obkljukaj tocno tako, kot mam jst

jurre :: 30. maj 2004, 18:04

imam tako kot ti! ze pri instalaciji sem nastavil 1024 vendar se vedno zazene z 800 ;((

bom probal zvisat ce bo popravil na visjo resolucijo
sem probal dat na 1280 in se vedno pise 1024 v resnici je pa 800

slikca:

aja, btw za graficno mi pise da 3d pospesevanje ni na voljo??
zgleda da mu mankajo driverji?!

Zgodovina sprememb…

spremenil: jurre (30. maj 2004 ob 18:20)

Mikrohard :: 30. maj 2004, 21:59

Ja.. če 3d pospeševanje ni na voljo, ti manjkajo driverji.. a resolucijo bi se vseeno moglo dati zvišati.. pobaj obkljukati samo tisto resolucijo, ki jo nameravaš uporabljati.. nič nižjih.. pa probaj izbrati točne driverje za tvoj monitor, če jih boš lahko našel...

Zj sm videl, da mas ze instalirane driverje za monitor.. pol pa probaj izbrati VESA monitor ;)

Zgodovina sprememb…

spremenilo: Mikrohard (30. maj 2004 ob 22:00)

jurre :: 31. maj 2004, 20:10

evo, hvala ti, sem dal vesa monitor 1024x768 na 85hz pa dela

samo se zarad driverjev me zanima katere naj nalozim da bom imel 3d pospesevanje? atijevi mi sesujejo linux..

jlpktnst :: 31. maj 2004, 22:18

kupi si nvidio, js sem obupal... (ni kakih sprememb v driverjih ze vec kot pol leta)
drgac pa www.rage3d.com -> forum -> linux

jurre :: 1. jun 2004, 22:28

hah, pol bom pa kr brez pac, sm glih dobr do radeona 9800pro prisel pa nam sedaj kr menjal

Vredno ogleda ...

	Tema	Sporočila	Ogledi	Zadnje sporočilo
	Tema	Sporočila	Ogledi	Zadnje sporočilo
»	ATI linux gonilnliki in resolucija roli Oddelek: Operacijski sistemi	12	2052 (1939)	roli 14. apr 2006 13:26:38
»	radeon 9200 suse10 brightness problem rocky22 Oddelek: Operacijski sistemi	25	1958 (1774)	roli 12. apr 2006 17:30:02
»	Linux / ATI Radeon / problem z driverji ahac Oddelek: Operacijski sistemi	13	1755 (1572)	ahac 26. nov 2003 20:26:27
»	Suse 8.2 težave z grafično... pacman Oddelek: Operacijski sistemi	9	1799 (1687)	norvalk 12. sep 2003 03:56:20
»	Linux in kWord TuXterrestrial Oddelek: Programska oprema	11	1675 (1522)	Gh0st 4. feb 2002 15:23:28

Več podobnih tem

Zadnje novice

Zadnji članki

Išči:

Forum » Operacijski sistemi »
suse 9.1 in radeon 9800PRO

suse 9.1 in radeon 9800PRO