Forum » Operacijski sistemi » Suse 8.2 težave z grafično...
Suse 8.2 težave z grafično...
pacman ::
Sem novi uporabnik Suse 8.2 pro
in namestitev sem nekako izvedel do zadnjega koraka kjer se nastavi grafična kartica in še neke svari, ki pa jih nisem mogel videti ker je šla slika k hudiču
. No nekako sem se prebil z tipko enter naprej....ponovni zagon in os se je naložil.
Zdaj me pa zanima kako naj nastavim mojo grafično da bo delovalo 3d pospeševanje oz da bo tako kot mora biti.
Problem je v tem da je na plati integriran i810 in v pci grafična ATI Radeon 7000 PCI 64MB (prepoza jo kot radeon VE) na katero je tudi priključen monitor Sony HMD A220. Tako da mi zdaj kaže kot da mam dva monitorja (en pač ni nastavljen) in zato ni možno omogočiti 3d.
Poskusil se že odstraniti i810 apak brez uspeha saj sem po testu ostal brez oken.
Nevem točno kako naj podrobneje opišem problem
Prosim če ima kdo kakšen nasvet kako naj rešin problem
Ali če manjkajo kakšni podatki...povejte pa jih napišem
in namestitev sem nekako izvedel do zadnjega koraka kjer se nastavi grafična kartica in še neke svari, ki pa jih nisem mogel videti ker je šla slika k hudiču . No nekako sem se prebil z tipko enter naprej....ponovni zagon in os se je naložil.Zdaj me pa zanima kako naj nastavim mojo grafično da bo delovalo 3d pospeševanje oz da bo tako kot mora biti.
Problem je v tem da je na plati integriran i810 in v pci grafična ATI Radeon 7000 PCI 64MB (prepoza jo kot radeon VE) na katero je tudi priključen monitor Sony HMD A220. Tako da mi zdaj kaže kot da mam dva monitorja (en pač ni nastavljen) in zato ni možno omogočiti 3d.
Poskusil se že odstraniti i810 apak brez uspeha saj sem po testu ostal brez oken.
Nevem točno kako naj podrobneje opišem problem
Prosim če ima kdo kakšen nasvet kako naj rešin problem
Ali če manjkajo kakšni podatki...povejte pa jih napišem
norvalk ::
prilepi sem vsebino svoje /etc/XF86Config datoteke, pa bomo videli kako se ti je stvar skonfigurirala. povej tudi kaksno misko imas in na kaksen vhod je priklopljena.
lp
lp
pacman ::
# generic XFree86 4.x configuration file
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/uni/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "BlankTime" "0"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# extensions
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbRules" "xfree86"
Option "XkbKeycodes" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Protocol" "imps/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
HorizSync 25-40
Identifier "Monitor[0]"
ModelName "Initial"
VendorName "Initial"
VertRefresh 47-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 31.5 640 656 720 840 480 481 484 500 # 6. Try
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 5. Try
Modeline "640x480" 28 640 664 760 800 480 491 493 525 # 4. Try
Modeline "640x480" 28.32 640 664 760 800 480 491 493 525 # 3. Try
Modeline "640x480" 25.18 640 664 760 800 480 491 493 525 # 2. Try
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 1. Try
EndSection
# Screen Section for module X support
# -------------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
# Screen Section for fbdev support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 24
Modes "default"
EndSubSection
SubSection "Display"
Depth 32
Modes "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "default"
EndSubSection
Device "Device[fbdev]"
Identifier "Screen[fbdev]"
Monitor "Monitor[0]"
EndSection
# Screen Section for vga support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
Device "Device[vga]"
Identifier "Screen[vga]"
Monitor "Monitor[0]"
EndSection
Section "Device"
Driver "radeon"
Identifier "Device[0]"
BusID "1:5:0"
# device_options
Option "sw_cursor" "on"
EndSection
Section "Device"
Driver "fbdev"
Identifier "Device[fbdev]"
BusID "1:5:0"
# fbdev_options
Option "ShadowFB" "off"
EndSection
Section "Device"
Driver "vga"
Identifier "Device[vga]"
BusID "1:5:0"
# vga_options
Option "KGAUniversal"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Xinerama" "off"
Screen "Screen[fbdev]"
EndSection
Miska je pa navadna s kolesckom na PS/2 (navadni okrogli vtic.
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
FontPath "/usr/X11R6/lib/X11/fonts/URW/"
FontPath "/usr/X11R6/lib/X11/fonts/uni/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "BlankTime" "0"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# extensions
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbRules" "xfree86"
Option "XkbKeycodes" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Protocol" "imps/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
HorizSync 25-40
Identifier "Monitor[0]"
ModelName "Initial"
VendorName "Initial"
VertRefresh 47-75
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "640x480" 31.5 640 656 720 840 480 481 484 500 # 6. Try
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 5. Try
Modeline "640x480" 28 640 664 760 800 480 491 493 525 # 4. Try
Modeline "640x480" 28.32 640 664 760 800 480 491 493 525 # 3. Try
Modeline "640x480" 25.18 640 664 760 800 480 491 493 525 # 2. Try
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 1. Try
EndSection
# Screen Section for module X support
# -------------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
# Screen Section for fbdev support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 24
Modes "default"
EndSubSection
SubSection "Display"
Depth 32
Modes "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "default"
EndSubSection
Device "Device[fbdev]"
Identifier "Screen[fbdev]"
Monitor "Monitor[0]"
EndSection
# Screen Section for vga support
# ----------------------------------
Section "Screen"
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
Device "Device[vga]"
Identifier "Screen[vga]"
Monitor "Monitor[0]"
EndSection
Section "Device"
Driver "radeon"
Identifier "Device[0]"
BusID "1:5:0"
# device_options
Option "sw_cursor" "on"
EndSection
Section "Device"
Driver "fbdev"
Identifier "Device[fbdev]"
BusID "1:5:0"
# fbdev_options
Option "ShadowFB" "off"
EndSection
Section "Device"
Driver "vga"
Identifier "Device[vga]"
BusID "1:5:0"
# vga_options
Option "KGAUniversal"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Xinerama" "off"
Screen "Screen[fbdev]"
EndSection
Miska je pa navadna s kolesckom na PS/2 (navadni okrogli vtic.
Jebiveter ::
Zal te moram rahlo razocarat... ATI pre-8xxx imajo KRIMINALNO podporo za hardware OpenGL pospesevanje! Ravno iz tega razloga sem pred kratkim presaltal z R7500 na GF4 Ti4200. Z GFjem mi delujejo vse igre (UT, ET,...) normalo pri full-speed. :)
Sam sem se z radonom nekaj casa matral in mi je celo uspelo pripravit linux da je lavfal UT a zal le v oknu, fullscreen pa ni teorije...
Lahko se potrudis in sprobas DRI drajverje. Ce ti uspe prosim, deli izkusnje z nami.
BTW: 8.2 Pro je na 5ih CDjih, rajt?
Sam sem se z radonom nekaj casa matral in mi je celo uspelo pripravit linux da je lavfal UT a zal le v oknu, fullscreen pa ni teorije...
Lahko se potrudis in sprobas DRI drajverje. Ce ti uspe prosim, deli izkusnje z nami.
BTW: 8.2 Pro je na 5ih CDjih, rajt?
Certainty of death. Small chance of success. What are we waiting for?
Brane2 ::
V detajle ne poznam odgovor, vem pa približno.
Za vsako kartico lahko v tem filetku Xih dopoves, kje jo bo nasel.
Z lspci zlistas naprave, ki jih CPU najde okrog sebe in si zapomnis njihove IDje (tiste cifre "0:2:1! etc)
Nato te PCI nasleove vneses v opis vsake kartice. tudi videoelektronika znotraj i810 je verjetno videti s strani procesorja kot posebna kartica...
Za vsako kartico lahko v tem filetku Xih dopoves, kje jo bo nasel.
Z lspci zlistas naprave, ki jih CPU najde okrog sebe in si zapomnis njihove IDje (tiste cifre "0:2:1! etc)
Nato te PCI nasleove vneses v opis vsake kartice. tudi videoelektronika znotraj i810 je verjetno videti s strani procesorja kot posebna kartica...
Brane2 ::
Yeah. Poglej si zadnje stiri odstavke svojega Xconfiga.
Tam so opisi "Deviceov" (radeon, fbdev- navaden frame buffer driver in vga- vga driver)
Vsi imajo naslov 1:5:0, kar je malo tezka.
Domnevam, da bi Radeon moral imeti en naslov, vse ostalo pa se nanasa na razlicne driverje za i810 in bi moralo imeti drugi naslov.
Pa tudi tam ne stekam, zakaj bi rabil VGA driver, ce imas veliko boljsi frame buffer. Jaz bi (najprej naredil varnostno kopijo, seveda, nato pa...) zbrisal zadnje odstavke, ki se ne nanasajo na radeon ali fbdev, naslov radeona ali fbdeva bi popravil (glede na porocilo lspci) in to je to.
Aja pa se Screen sectione, ki se ne nanasajo na enega ali drugega bi zbrisal.
Tam so opisi "Deviceov" (radeon, fbdev- navaden frame buffer driver in vga- vga driver)
Vsi imajo naslov 1:5:0, kar je malo tezka.
Domnevam, da bi Radeon moral imeti en naslov, vse ostalo pa se nanasa na razlicne driverje za i810 in bi moralo imeti drugi naslov.
Pa tudi tam ne stekam, zakaj bi rabil VGA driver, ce imas veliko boljsi frame buffer. Jaz bi (najprej naredil varnostno kopijo, seveda, nato pa...) zbrisal zadnje odstavke, ki se ne nanasajo na radeon ali fbdev, naslov radeona ali fbdeva bi popravil (glede na porocilo lspci) in to je to.
Aja pa se Screen sectione, ki se ne nanasajo na enega ali drugega bi zbrisal.
Brane2 ::
Pa se nekaj. VEcina programov pusti svoje opazke in poglede na svet v mapi /var/log
Tam pobrskaj za filetkom X11.log ali nekaj podobnega in videl bos, kaj mori X-e ob startu...
Tam pobrskaj za filetkom X11.log ali nekaj podobnega in videl bos, kaj mori X-e ob startu...
pacman ::
BTW: 8.2 Pro je na 5ih CDjih, rajt?
Ja
, so pa se neki DVD dodaki ki jih pa nimam.
Ok bom probal par stvari pa mo vidli če bo kaj ratalo
Ja
, so pa se neki DVD dodaki ki jih pa nimam.Ok bom probal par stvari pa mo vidli če bo kaj ratalo
norvalk ::
hojla!
upam, da je stvar se aktualna - zal, ti prej nisem utegnil odgovoriti!
kakrsna je tvoja xfree86 konfiguracijska datoteka videti sedaj, bi rekel, da je "genericna" in na splosno precej neuporabna! sem se zatorej potrudil in ti sestavil taksno, ki bi morala ustrezati tvoji strojni opremi - vendar naj tu velja opozorilo, da sam atijeve kartice ne premorem (sem pa pred kratkim nekomu ze uspesno konfiguriral sistem z radeon 8500le) in da sem pri njenem pisanju izhajal iz dolocenih predpostavk:
* da uporabljas atijeve gonilnike (!)
* da imas v kernelu izkljuceno podporo dri (!) oz. vkljuceno kvecejmo kot modul
* da tvoj monitor zmore osvezevanje slike 30-70khz vodoravno in 48-120hz navpicno (izhajal sem iz dokumentacije na sonyjevih spletnih straneh, kjer tvojega modela monitorja konkretno ni omenjenega, so pa vsi ostali v tem smislu enaki - vseeno preveri!!!)
* da zelis uporabljati dpms
* da ti ukaz "cat /proc/pci" za tvoj "vga compatible controller" vrne vrednost "Bus 1, device 0, function 1" (od tod vnos BusID "PCI:1:0:1") - preveri in ustrezno popravi!
* da zelis uporabljati 24bitno globino barv
* da zelis imeti privzeto resolucijo nastavljeno na 1024x768 (alias xga)
* da zelis podporo slovenskim zankom (od tod vnos Option "XkbLayout" "si")
* da uporabljas misko prikljopljeno bodisi prek ps/2 bodisi prek usb vmesnika, pri cemer imas v /dev narejene ustrezne povezave /dev/psaux in/ali /dev/usbmouse
* da zelis na miski uporabljati tudi kolescek
v datoteko sem v pomoc dodal se nekatere komentarje v anglescini - za katero upam, da ti ne povzroca tezav - ki so deloma pobrani iz genericne atijeve konfiguracijske datoteke (dobljene prek atijevega xfree86 konfiguracijskega orodja fglrxconfig), deloma moj pripis. tudi sicer sem jo skusal urediti cimbolj "razumljivo".
upam, da bo to to! lp
se vsebina datoteke:
##=============================================================================
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
## Use the xfs font server for improved interactive performance:
# FontPath "unix/:7100"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
##=============================================================================
Section "Module"
Load "record" ## X event recorder
Load "extmod" ## Misc. required extensions
Load "ddc" ## DDC support
Load "dbe" ## Double-buffering
Load "dri" ## Direct rendering infrastructure 1)
# Load "GLcore" ## OpenGL support 1)
Load "glx" ## OpenGL X protocol interface
Load "xtrap"
# Load "v4l" ## Video4Linux
## You only need the following modules if you do not use xfs:
Load "freetype" ## TrueType font handler
Load "type1" ## Adobe Type 1 font handler
Load "speedo"
## 1) removed with nvidia accelerated driver
EndSection
##=============================================================================
Section "ServerFlags"
Option "BlankTime" "15"
Option "StandbyTime" "30"
Option "SuspendTime" "40"
Option "OffTime" "60"
# Option "Xinerama" "True" ## not for Nvidia's TwinView
EndSection
##=============================================================================
Section "DRI"
# Group 27 ## Access to OpenGL ICD is restricted to a specific user group
# Mode 0660
Mode 0666 ## Access to OpenGL ICD is allowed for all users
EndSection
##=============================================================================
Section "ServerLayout"
Identifier "Main Layout"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
##=============================================================================
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# SubSection "Display"
# Depth 1
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 4
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 8
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
SubSection "Display"
Depth 24
Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# Virtual 0 0
EndSubSection
# SubSection "Display"
# Depth 32
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
EndSection
##=============================================================================
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies"
BoardName "Radeon 7000 PCI"
BusID "PCI:1:0:1"
## ATI card options:
Option "ForcePCIMode" "True"
# === Disable PnP Monitor ===
# Option "NoDDC"
# === Disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
EndSection
##=============================================================================
Section "Monitor"
Identifier "Monitor0"
VendorName "Sony"
ModelName "HMD A220"
HorizSync 30.0 - 70.0
VertRefresh 48.0 - 120.0
Option "DPMS"
## Uncomment only one of the following lines:
# DisplaySize 406 305 ## to set UXGA Monitor to 100dpi
# DisplaySize 423 317 ## to set UXGA Monitor to 96dpi
# DisplaySize 542 406 ## to set UXGA Monitor to 75dpi
# DisplaySize 325 260 ## to set SXGA Monitor to 100dpi
# DisplaySize 339 271 ## to set SXGA Monitor to 96dpi
# DisplaySize 382 306 ## to set SXGA Monitor to 85dpi
# DisplaySize 433 347 ## to set SXGA Monitor to 75dpi
# DisplaySize 260 195 ## to set XGA Monitor to 100dpi
# DisplaySize 271 203 ## to set XGA Monitor to 96dpi
# DisplaySize 306 229 ## to set XGA Monitor to 85dpi
# DisplaySize 347 260 ## to set XGA Monitor to 75dpi
# DisplaySize 203 152 ## to set SVGA Monitor to 100dpi
# DisplaySize 212 159 ## to set SVGA Monitor to 96dpi
# DisplaySize 271 203 ## to set SVGA Monitor to 75dpi
# DisplaySize 163 122 ## to set VGA Monitor to 100dpi
# DisplaySize 170 127 ## to set VGA Monitor to 96dpi
# DisplaySize 217 163 ## to set VGA Monitor to 75dpi
##-----------------------------------------------------------------------------
## VESA UXGA (1600x1200)
##
ModeLine "UXGA@60Hz" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
##-----------------------------------------------------------------------------
## VESA SXGA (1280x1024)
##
ModeLine "SXGA@85Hz" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
ModeLine "SXGA@75Hz" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync
ModeLine "SXGA@60Hz" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +HSync +VSync
##-----------------------------------------------------------------------------
## VESA WXGA (1280x800)
##
##-----------------------------------------------------------------------------
## VESA XGA (1024x768)
##
ModeLine "XGA@85Hz" 94.5 1024 1072 1168 1376 768 769 772 808 +HSync +VSync
ModeLine "XGA@75Hz" 78.8 1024 1040 1136 1312 768 769 772 800 +HSync +VSync
ModeLine "XGA@60Hz" 65.0 1024 1048 1184 1344 768 771 777 806 -HSync -VSync
##-----------------------------------------------------------------------------
## VESA SVGA (800x600)
##
ModeLine "SVGA@85Hz" 563.0 800 832 896 1048 600 601 604 631 +HSync +VSync
ModeLine "SVGA@75Hz" 49.5 800 816 896 1056 600 601 604 625 +HSync +VSync
ModeLine "SVGA@60Hz" 400.0 800 840 968 1056 600 601 605 628 +HSync +VSync
##-----------------------------------------------------------------------------
## VESA VGA (640x480)
##
ModeLine "VGA@85Hz" 36.0 640 696 752 832 480 481 484 509 -HSync -VSync
ModeLine "VGA@75Hz" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
ModeLine "VGA@60Hz" 25.2 640 656 752 800 480 490 492 525 -HSync -VSync
EndSection
##=============================================================================
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "Protocol" "Standard"
# Option "RightAlt" "Meta"
# Option "RightCtl" "Control"
# Option "ScrollLock" "Compose"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbKeyCodes" "xfree86"
Option "XkbLayout" "si"
EndSection
##=============================================================================
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "imPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
##=============================================================================
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "imPS/2"
Option "Device" "/dev/usbmouse"
Option "ZAxisMapping" "4 5"
EndSection
upam, da je stvar se aktualna - zal, ti prej nisem utegnil odgovoriti!
kakrsna je tvoja xfree86 konfiguracijska datoteka videti sedaj, bi rekel, da je "genericna" in na splosno precej neuporabna! sem se zatorej potrudil in ti sestavil taksno, ki bi morala ustrezati tvoji strojni opremi - vendar naj tu velja opozorilo, da sam atijeve kartice ne premorem (sem pa pred kratkim nekomu ze uspesno konfiguriral sistem z radeon 8500le) in da sem pri njenem pisanju izhajal iz dolocenih predpostavk:
* da uporabljas atijeve gonilnike (!)
* da imas v kernelu izkljuceno podporo dri (!) oz. vkljuceno kvecejmo kot modul
* da tvoj monitor zmore osvezevanje slike 30-70khz vodoravno in 48-120hz navpicno (izhajal sem iz dokumentacije na sonyjevih spletnih straneh, kjer tvojega modela monitorja konkretno ni omenjenega, so pa vsi ostali v tem smislu enaki - vseeno preveri!!!)
* da zelis uporabljati dpms
* da ti ukaz "cat /proc/pci" za tvoj "vga compatible controller" vrne vrednost "Bus 1, device 0, function 1" (od tod vnos BusID "PCI:1:0:1") - preveri in ustrezno popravi!
* da zelis uporabljati 24bitno globino barv
* da zelis imeti privzeto resolucijo nastavljeno na 1024x768 (alias xga)
* da zelis podporo slovenskim zankom (od tod vnos Option "XkbLayout" "si")
* da uporabljas misko prikljopljeno bodisi prek ps/2 bodisi prek usb vmesnika, pri cemer imas v /dev narejene ustrezne povezave /dev/psaux in/ali /dev/usbmouse
* da zelis na miski uporabljati tudi kolescek
v datoteko sem v pomoc dodal se nekatere komentarje v anglescini - za katero upam, da ti ne povzroca tezav - ki so deloma pobrani iz genericne atijeve konfiguracijske datoteke (dobljene prek atijevega xfree86 konfiguracijskega orodja fglrxconfig), deloma moj pripis. tudi sicer sem jo skusal urediti cimbolj "razumljivo".
upam, da bo to to! lp
se vsebina datoteke:
##=============================================================================
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
## Use the xfs font server for improved interactive performance:
# FontPath "unix/:7100"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
EndSection
##=============================================================================
Section "Module"
Load "record" ## X event recorder
Load "extmod" ## Misc. required extensions
Load "ddc" ## DDC support
Load "dbe" ## Double-buffering
Load "dri" ## Direct rendering infrastructure 1)
# Load "GLcore" ## OpenGL support 1)
Load "glx" ## OpenGL X protocol interface
Load "xtrap"
# Load "v4l" ## Video4Linux
## You only need the following modules if you do not use xfs:
Load "freetype" ## TrueType font handler
Load "type1" ## Adobe Type 1 font handler
Load "speedo"
## 1) removed with nvidia accelerated driver
EndSection
##=============================================================================
Section "ServerFlags"
Option "BlankTime" "15"
Option "StandbyTime" "30"
Option "SuspendTime" "40"
Option "OffTime" "60"
# Option "Xinerama" "True" ## not for Nvidia's TwinView
EndSection
##=============================================================================
Section "DRI"
# Group 27 ## Access to OpenGL ICD is restricted to a specific user group
# Mode 0660
Mode 0666 ## Access to OpenGL ICD is allowed for all users
EndSection
##=============================================================================
Section "ServerLayout"
Identifier "Main Layout"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
##=============================================================================
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# SubSection "Display"
# Depth 1
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 4
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 8
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 15
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
# SubSection "Display"
# Depth 16
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
SubSection "Display"
Depth 24
Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# Virtual 0 0
EndSubSection
# SubSection "Display"
# Depth 32
# Modes "XGA@85Hz" "SVGA@85Hz" "VGA@85Hz"
# EndSubSection
EndSection
##=============================================================================
Section "Device"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies"
BoardName "Radeon 7000 PCI"
BusID "PCI:1:0:1"
## ATI card options:
Option "ForcePCIMode" "True"
# === Disable PnP Monitor ===
# Option "NoDDC"
# === Disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
EndSection
##=============================================================================
Section "Monitor"
Identifier "Monitor0"
VendorName "Sony"
ModelName "HMD A220"
HorizSync 30.0 - 70.0
VertRefresh 48.0 - 120.0
Option "DPMS"
## Uncomment only one of the following lines:
# DisplaySize 406 305 ## to set UXGA Monitor to 100dpi
# DisplaySize 423 317 ## to set UXGA Monitor to 96dpi
# DisplaySize 542 406 ## to set UXGA Monitor to 75dpi
# DisplaySize 325 260 ## to set SXGA Monitor to 100dpi
# DisplaySize 339 271 ## to set SXGA Monitor to 96dpi
# DisplaySize 382 306 ## to set SXGA Monitor to 85dpi
# DisplaySize 433 347 ## to set SXGA Monitor to 75dpi
# DisplaySize 260 195 ## to set XGA Monitor to 100dpi
# DisplaySize 271 203 ## to set XGA Monitor to 96dpi
# DisplaySize 306 229 ## to set XGA Monitor to 85dpi
# DisplaySize 347 260 ## to set XGA Monitor to 75dpi
# DisplaySize 203 152 ## to set SVGA Monitor to 100dpi
# DisplaySize 212 159 ## to set SVGA Monitor to 96dpi
# DisplaySize 271 203 ## to set SVGA Monitor to 75dpi
# DisplaySize 163 122 ## to set VGA Monitor to 100dpi
# DisplaySize 170 127 ## to set VGA Monitor to 96dpi
# DisplaySize 217 163 ## to set VGA Monitor to 75dpi
##-----------------------------------------------------------------------------
## VESA UXGA (1600x1200)
##
ModeLine "UXGA@60Hz" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
##-----------------------------------------------------------------------------
## VESA SXGA (1280x1024)
##
ModeLine "SXGA@85Hz" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
ModeLine "SXGA@75Hz" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +HSync +VSync
ModeLine "SXGA@60Hz" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +HSync +VSync
##-----------------------------------------------------------------------------
## VESA WXGA (1280x800)
##
##-----------------------------------------------------------------------------
## VESA XGA (1024x768)
##
ModeLine "XGA@85Hz" 94.5 1024 1072 1168 1376 768 769 772 808 +HSync +VSync
ModeLine "XGA@75Hz" 78.8 1024 1040 1136 1312 768 769 772 800 +HSync +VSync
ModeLine "XGA@60Hz" 65.0 1024 1048 1184 1344 768 771 777 806 -HSync -VSync
##-----------------------------------------------------------------------------
## VESA SVGA (800x600)
##
ModeLine "SVGA@85Hz" 563.0 800 832 896 1048 600 601 604 631 +HSync +VSync
ModeLine "SVGA@75Hz" 49.5 800 816 896 1056 600 601 604 625 +HSync +VSync
ModeLine "SVGA@60Hz" 400.0 800 840 968 1056 600 601 605 628 +HSync +VSync
##-----------------------------------------------------------------------------
## VESA VGA (640x480)
##
ModeLine "VGA@85Hz" 36.0 640 696 752 832 480 481 484 509 -HSync -VSync
ModeLine "VGA@75Hz" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
ModeLine "VGA@60Hz" 25.2 640 656 752 800 480 490 492 525 -HSync -VSync
EndSection
##=============================================================================
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Option "Protocol" "Standard"
# Option "RightAlt" "Meta"
# Option "RightCtl" "Control"
# Option "ScrollLock" "Compose"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbKeyCodes" "xfree86"
Option "XkbLayout" "si"
EndSection
##=============================================================================
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "imPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
##=============================================================================
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "imPS/2"
Option "Device" "/dev/usbmouse"
Option "ZAxisMapping" "4 5"
EndSection
Zgodovina sprememb…
- spremenil: norvalk ()
norvalk ::
se to! Option "ForcePCIMode" "True" lahko sicer izpustis, vendar se mi zdi, da v tvojem primeru (pci in ne danes bolj "standardno" agp vodilo) lahko odigra odlocilno vlogo... skratka - poizkusi z in sele nato brez!
se 1x lp
se 1x lp
Vredno ogleda ...
| Tema | Ogledi | Zadnje sporočilo | |
|---|---|---|---|
| Tema | Ogledi | Zadnje sporočilo | |
| » | ATI linux gonilnliki in resolucijaOddelek: Operacijski sistemi | 2052 (1939) | roli |
| » | radeon 9200 suse10 brightness problemOddelek: Operacijski sistemi | 1958 (1774) | roli |
| » | Suse 9.0 problemOddelek: Operacijski sistemi | 1205 (1043) | Nerdor |
| » | suse 9.1 in radeon 9800PROOddelek: Operacijski sistemi | 1735 (1607) | jurre |
| » | Radeon 9000pro & SuSE 9.0, a komu dela?Oddelek: Operacijski sistemi | 1284 (1197) | ajagodnik |