Forum » Loža » Robotska Kosilnica
Robotska Kosilnica
halozan ::
Malo spremljam forum in razmišljam o nabavi robotske kosilnice. Skupna površina je med 350m2 do 400m2. Težava je, da imam na parceli en ločen del, kjer je vmes dovoz ter še drug del, kjer je ozek prehod cca. 60cm, kar pa zna biti težava za žico, saj pri večini kosilnic piše, da mora biti prehod najmanj 130 cm oz 60~70cm med kabli.
Kako se spopast s takšnim izzivom? Ker če bom moral en manjši del še vodno ročno pokosit, potem itak nisem nič naredil.
Kako se spopast s takšnim izzivom? Ker če bom moral en manjši del še vodno ročno pokosit, potem itak nisem nič naredil.
sbawe64 ::
Od 1:44 je prehod v drug del
Manj kot 15 cm razmika.To so Nemci naštudirali v nulo.
Je pa tudi odvisno od samega modela in proizvajalca robota.
Manj kot 15 cm razmika.To so Nemci naštudirali v nulo.
Je pa tudi odvisno od samega modela in proizvajalca robota.
2020 is new 1984
Corona World order
Corona World order
Zgodovina sprememb…
- spremenilo: sbawe64 ()
sbawe64 ::
10 cm je razmika, ter zanka na vsaki strani
Here is the drawing of the loop: https://drive.google.com/file/d/1w-5AYE...
The smaller the outside loops, the weaker their effect, the wider the loops the stronger, but they should NEVER be wider than the inside wire distance, otherwise they will begin canceling out the inner field completely.
The widths for the smallest passage I could find were 10cm, 10cm, 10cm.
You can also place a loop on one side only, for example for correcting the exact position in the docking station if the housing would otherwise hit the charging contacts because of unlucky field geometry.
Here is the drawing of the loop: https://drive.google.com/file/d/1w-5AYE...
The smaller the outside loops, the weaker their effect, the wider the loops the stronger, but they should NEVER be wider than the inside wire distance, otherwise they will begin canceling out the inner field completely.
The widths for the smallest passage I could find were 10cm, 10cm, 10cm.
You can also place a loop on one side only, for example for correcting the exact position in the docking station if the housing would otherwise hit the charging contacts because of unlucky field geometry.
2020 is new 1984
Corona World order
Corona World order
Zgodovina sprememb…
- spremenilo: sbawe64 ()
Vredno ogleda ...
Tema | Ogledi | Zadnje sporočilo | |
---|---|---|---|
Tema | Ogledi | Zadnje sporočilo | |
» | Vrtna kosilnica (strani: 1 2 3 4 5 6 7 8 )Oddelek: Loža | 69628 (781) | toyotarav4 |
» | Nakup robotske kosilniceOddelek: Pomoč in nasveti | 579 (391) | miha98 |
» | Katero robotsko kosilnico (strani: 1 2 )Oddelek: Loža | 15300 (7571) | feryz |
» | Aku-kosilnica? (strani: 1 2 )Oddelek: Loža | 13139 (10462) | dvojka |