Yamaha RX-V757 un 5.1 izhod ne dela vedno...

Tudi meni Woofer ni deloval (na RX-V440), ko sem imel za input izbran tuner. V navodilih nic ni omenjeno, tako da ne vem ce to ni kar "feature".

Naceloma se nisem dost sekiral, ker ne tunerja ne wooferja ne uporabljam prav dosti.

Hm? Meni normalno dela pri vseh digitalnih inputih.

Sem ravnokar prizgal in dela normalno ce imam spdif input (gor je airport expressov optical out).

Pri SACD tudi dela woofer, ceprav je vstekan v tistih 6 analognih inputov...

Ne vem ce ima 757 iste menije, v SOUND MENU imam jaz pod 3. LFE LEVEL, ki ga imam privzeto na 0 (kar pomeni da je woofer izkljucen), pri tem pa DTS ali dolby surround tega ne upostevata. Morda imas ti isto nastavljeno in zato ne slisis wooferja? Ce pa v BASIC meniju izkljucim subwoofer mi pa ne dela tudi ce na input obesim DTS ali dolby surround.

Sem se jebal cel dan pa mi ni uspelo. Sem se potem zapeljal v Big Bang, kjer pa pojma o pojmu niso imeli. Rekli so:"ja valjda, moraš vklopit Pro logic II!"
No potem so me pa poslali k serviserju samo je bilo že zaprto.

Bom pa jutri probal kar je danix svetoval. Upam da mi uspe, ker mi gre na jetra, ko je na radiu Precioso in mi pod kavčem nič ne buta :)

SONY STR-DE 495 enaka težava !

Prekopirano iz navodil za tvoj reciever (str.57): Download

1 SOUND MENU

Speaker settings A)SPEAKER SET
Use to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
Front speakers FRONT SP
Choices: LARGE, SMALL
• Select SMALL if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected with “LFE/BASS
OUT”.
• Select LARGE if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers......

A si probal kaj v zvezi s tem?

Skopirano iz manuala za rxv657:
===========================================================
Bass out LFE/BASS OUT

Low-frequency (bass) signals can be directed to the
subwoofer and/or the front left and right speakers
according to the characteristics of your system. This
setting also determines the routing of the LFE (lowfrequency
effect) signals found in Dolby Digital or DTS
sources.

Choices: SWFR, FRNT, BOTH

- Select SWFR if you connect a subwoofer. LFE and
low-frequency signals from other channels are directed
to the subwoofer according to the speaker settings.

- Select FRNT if you do not use a subwoofer. LFE and
low frequency signals from other channels are directed
to the front speakers according to the speaker settings
(even if you have previously set front speakers to
SML).

- Select BOTH if you connect a subwoofer and you want
to output low-frequency signals from front channels to
both the front speakers and subwoofer. LFE and lowfrequency
signals from other channels are also directed
to the subwoofer according to the speaker settings. Use
this function to reinforce low-frequency signals using
the subwoofer when playing back sources such as CDs.
===========================================================

Ce imas kabelsko TV in RADIO, rajsi uporabljaj to povezavo. Tista drot antenca je bol kot ne samo zasilno. Drugace pa boljso anteno ubodi, a ne. Pomoje ti preklaplja zato ker ti skace med stereo in mono.