nujna pomoč - problem s tiskalnikom

Kupi novega? Najbolj pametna ideja. Popravljat se tega ne splača, vsaj moje mnenje.

Če prej navedeno ne bo pomagalo, še enkrat naloži gonilnike - stare zbriši.

Odpri vse kar se odpret da, vzemi glavo ven iz ležišča in poglej iz vseh strani, če ni kje kak košček papirja. Večkrat pihni v notranjost (ne pa pljuvat! )
Izklopi usb od računalnika in poizkusi natisnit preizkusno stran (glej spodaj: "Service pattern print") , torej brez povezave z računalnikom.
Izpiše kaj ali je napaka ista ?

V servisni mode prideš takole:



Canon Pixma MP150

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turn off)
then turn it on again. this works. thanks.



Srečno in poročaj !