wpasupplicant in SD LJ @ Slo-Tech

Forum » Omrežja in internet »
wpasupplicant in SD LJ

wpasupplicant in SD LJ

r5r :: 11. nov 2008, 21:09

V študentskem domu v LJ se mi povezava do spleta prekine natanko po eni uri, morda še kakšnih par sekund več. Nato pa se v wpa_cli stalno ponavljata vrstici:

<2>CTRL-EVENT-EAP-STARTED EAP authentication started
<2>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected

Zadevo zaenkrat rešujem tako, da izklopim eth0 ter ga ponovno vklopim, kar ponovno požene tudi wpasupplicant, ki me v omrežje prijavlja skoraj minuto. Nato pa moram še sprožiti postopek ponovne dodelitve ustreznega IP naslova (zapisan na osebni strani).

Upošteval sem vse korake v navodilih za povezavo na njihovih spletnih straneh, zato me tudi uspešno prijavi v omrežje. Najprej sem sumil, da je za napako kriv wpasupplicant, zato sem namestil več različic: 0.5.5, 0.6.4 in 0.6.5, kar pa ne pomaga.

Zadevo sem prijavil skrbniku omrežja, ki trdi, da napake ne more odpraviti.

Za naslednje krivce imam iptables, vendar mi Google ne posteže karkoli glede tega, ali kakšen manjkajoč del v kernelu.

Na koga se lahko obrnem glede tega, saj nimajo zapisanih kakršnih koli kontaktnih podatkov glede tehnične pomoči? Je za vsem tem Arnes?

Ni ravno velik problem, je pa neprijeten.

And it makes me wonder.

wind :: 12. nov 2008, 01:50

jaz uporabljam wpasupplicant na Visti in mi kar deluje (včasim moram dat disable/enable adapter).

ne vem kaj predlagat. če sumiš iptables počisti vsa pravila in potem poizkusi...

Daedalus :: 12. nov 2008, 07:22

Daj vrži sem konfiguracijo. Pol pa lahko naprej rešujemo...

Man is condemned to be free; because once thrown into the world,
he is responsible for everything he does.
[J.P.Sartre]

zee :: 12. nov 2008, 07:22

@r5r: Katero distribucijo uporabljas? V novejsih izdajah Ubuntuja lahko vse potrebne nastavitve natipkas direkt v nm-applet in zadeva dela bp (to je v bistvu omrezje Eduroam).

@wnd: wpasupplicant? Zakaj pa ne uporabljas "uradnega" clienta (misljen je tale)?

zee
Linux: Be Root, Windows: Re Boot
Giant Amazon and Google Compute Cloud in the Sky.

Zgodovina sprememb…

spremenilo: zee (12. nov 2008 ob 07:24)

5er--> :: 12. nov 2008, 07:38

Po mojem v študencu nima eduroama, ampak kakšen interen net.

moowy123 :: 12. nov 2008, 08:06

To je res, sam so nastavitve z izjemo uporabniskega imena in gesla identicne

. To pa nebi smelo predstavljati večjih problemov za menjavo med eduroam in študentskimi domovi ... ( recimo )

zee :: 12. nov 2008, 08:14

Ravno zato.

zee
Linux: Be Root, Windows: Re Boot
Giant Amazon and Google Compute Cloud in the Sky.

wind :: 12. nov 2008, 10:11

zee: ker mi z uradnim clientom remote desktop prekine po 1min.

Ugotovil sem, da je težava ravno v SecureW2.

r5r :: 12. nov 2008, 16:06

Imam Debian, delal sem po navodilih za Ubuntu.

Konfiguracija je identična tisti na njihovi spletni strani s tem, da sem ustrezno spremenil uporabniško ime in geslo.

And it makes me wonder.

r5r :: 13. nov 2008, 22:06

Zapisi wpasupplicant, ko se zadeva prekine:

RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=46): 01 00 00 0f 01 4f 00 0f 01 55 73 65 72 $
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: maintaining EAP method data for fast reauthentication
EAPOL: enable timer tick
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=79 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=10):
0 6e 61 6d 65 3a User name:
EAP: using anonymous identity - hexdump_ascii(len=22):
9 6d 6f 75 73 40 73 64 2e 75 6e 69 anonymous@sd.uni
3 69 -lj.si
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=01:80:c2:00:00:03
TX EAPOL - hexdump(len=31): 01 00 00 1b 02 4f 00 1b 01 61 6e 6f 6e $
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=46): 01 00 00 06 01 50 00 06 15 20 00 00 00 $
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=80 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Using previous method data for fast re-authentication
EAP: Initialize selected EAP method: vendor 0 method 21 (TTLS)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
EAP: EAP entering state METHOD
SSL: Received packet(len=6) - Flags 0x20
EAP: EAP entering state METHOD
SSL: Received packet(len=6) - Flags 0x20
EAP-TTLS: Start (server ver=0, own ver=0)
EAP-TTLS: Start
SSL: (where=0x10 ret=0x1)
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:before/connect initialization
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client hello A
SSL: (where=0x1002 ret=0xffffffff)
SSL: SSL_connect:error in SSLv3 read server hello A
SSL: SSL_connect - want more data
SSL: 253 bytes pending from ssl_out
SSL: 253 bytes left to be sent out (of total 253 bytes)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=F$
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=01:80:c2:00:00:03
TX EAPOL - hexdump(len=263): 01 00 01 03 02 50 01 03 15 00 16 03 01$
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=120): 01 00 00 74 01 51 00 74 15 80 00 00 00$
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=81 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state METHOD
SSL: Received packet(len=116) - Flags 0x80
SSL: TLS Message Length: 106
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read server hello A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 read finished A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write change cipher spec A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write finished A
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 flush data
SSL: (where=0x20 ret=0x1)
SSL: (where=0x1002 ret=0x1)
SSL: 59 bytes pending from ssl_out
OpenSSL: tls_connection_handshake - Failed to read possible Applica$
SSL: 59 bytes left to be sent out (of total 59 bytes)
EAP-TTLS: TLS done, proceed to Phase 2
EAP-TTLS: fast reauth - may skip Phase 2
EAP-TTLS: Derived key - hexdump(len=64): [REMOVED]
EAP-TTLS: Authentication completed successfully (MAY_CONT)
EAP: method process -> ignore=FALSE methodState=MAY_CONT decision=C$
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=01:80:c2:00:00:03
TX EAPOL - hexdump(len=69): 01 00 00 41 02 51 00 41 15 00 14 03 01 $
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=46): 01 00 00 0a 01 52 00 0a 15 80 00 00 00 $
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=82 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state METHOD
SSL: Received packet(len=10) - Flags 0x80
SSL: TLS Message Length: 0
EAP-TTLS: received 0 bytes encrypted data for Phase 2
EAP-TTLS: Session resumption - skip phase 2
SSL: Building ACK (type=21 id=82 ver=0)
EAP-TTLS: Authentication completed successfully
EAP: method process -> ignore=FALSE methodState=DONE decision=UNCON$
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=01:80:c2:00:00:03
TX EAPOL - hexdump(len=10): 01 00 00 06 02 52 00 06 15 00
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=46): 01 00 00 04 04 52 00 04 00 00 00 00 00 $
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state DISCARD
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: authWhile --> 0
EAPOL: SUPP_BE entering state TIMEOUT
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
EAPOL: startWhen --> 0
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
TX EAPOL: dst=01:80:c2:00:00:03
TX EAPOL - hexdump(len=4): 01 01 00 00
EAPOL: idleWhile --> 0
EAP: EAP entering state SUCCESS
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed successfully
RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=46): 01 00 00 0f 01 53 00 0f 01 55 73 65 72 $
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: maintaining EAP method data for fast reauthentication
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=83 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=10):
0 6e 61 6d 65 3a User name:
EAP: using anonymous identity - hexdump_ascii(len=22):
9 6d 6f 75 73 40 73 64 2e 75 6e 69 anonymous@sd.uni
3 69 -lj.si
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=01:80:c2:00:00:03
TX EAPOL - hexdump(len=31): 01 00 00 1b 02 53 00 1b 01 61 6e 6f 6e $
EAPOL: SUPP_BE entering state RECEIVE
RX EAPOL from 00:1d:b3:1a:3f:00
RX EAPOL - hexdump(len=46): 01 00 00 06 01 54 00 06 15 20 00 00 00 $
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=84 method=21 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
EAP: Using previous method data for fast re-authentication
EAP: Initialize selected EAP method: vendor 0 method 21 (TTLS)
CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected
EAP: EAP entering state METHOD
SSL: Received packet(len=6) - Flags 0x20
EAP-TTLS: Start (server ver=0, own ver=0)
EAP-TTLS: Start
SSL: (where=0x10 ret=0x1)
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:before/connect initialization
SSL: (where=0x1001 ret=0x1)
SSL: SSL_connect:SSLv3 write client hello A

And it makes me wonder.

kriko1 :: 14. nov 2008, 16:25

Poglej dmesg če je kak dober razlog da prekine - sem v istem omrežju z opensuse in deluje bp.

r5r :: 14. nov 2008, 16:44

dmesg je bolj skop, napiše samo eth0 up. ;)

And it makes me wonder.

Vredno ogleda ...

	Tema	Sporočila	Ogledi	Zadnje sporočilo
	Tema	Sporočila	Ogledi	Zadnje sporočilo
!	[Vodič] Router v študentskem domu (Eduroam) (strani: 1 2 ) broken/link Oddelek: Omrežja in internet	70	65952 (381)	KajDelam? 9. dec 2024 15:08:20
»	Preverjanje veljavnosti certifikata na usmerjevalniku xardas Oddelek: Omrežja in internet	8	2881 (2550)	xardas 25. apr 2014 16:40:42
»	router priključen na router spodnjice Oddelek: Omrežja in internet	28	3758 (2328)	janco 24. apr 2012 00:12:02
»	Gentoo,wpa_supplicant,v študentskih domovih neboben Oddelek: Programska oprema	16	2717 (2339)	zee 2. mar 2009 07:19:35
»	Linux (Ubuntu) - ndiswrapper bluefish Oddelek: Operacijski sistemi	11	1707 (1622)	bluefish 31. maj 2007 19:32:30

Več podobnih tem

Zadnje novice

Zadnji članki

Išči:

Forum » Omrežja in internet »
wpasupplicant in SD LJ

wpasupplicant in SD LJ