Plošča QDI KinetiZ-da ali ne?

Kupujem
Ploščo QDI KinetiZ, 256 RAM, Thunder 1GhZ
Plošča:
Chipset
North bridge:VIA KT-133A
South bridge:VIA VT82C686B
Bus Type
5 PCI slots
1 AMR
1 AGP
1 ISA
CPU Support Socket A AMD Athlon and Duron Processors
AMD Athlon Processors at 750/800/850/900/950MHz , 1.1GHz and future 266MHZ FSB Athlon processor
AMD Duron Processors at 600/650/700/750/800MHz and future

System Memory Three 168 pin 3.3V PC133 DIMM sockets
Supports up to 1.5G SDRAM
Supports 66/100/133 MHz Synchronous DRAM and VCM SDRAM
And 66MHz EDO DRAM

Power Management ACPI V1.0 and APM compliant
Supports S0, S1, S3, S4, S5 ACPI power status
Auto adjust FAN speed in the different power status

USB 4 USB ports (2 for I/O panel and 2 for front panel)
USB 1.1 specification compliant

Bus Speed 200/266MHz FSB


BIOS 2 Mbit Flash ROM
Licensed advanced AWARD BIOS
Supports Plug and Play
Supports ACPI and OS directed power management

Storage system Two PCI Master IDE ports support up to 4 IDE devices
Supports ATA 100
One floppy port support up to two 3.5¡± or 5.25¡± floppy drives
( 360K/720K/1.2M/1.44M/2.88M)
Supports LS-120 floppy disk drive and ZIP drive

I/O Feature 2 High Speed Serial Ports (16550 Fast UART Compatible)
1 Enhanced Parallel Port Support EPP/ECP/SPP
1 PS/2 keyboard port
1 PS/2 mouse port
IrDA port support up to 115.2Kb/s transfer rate
All I/O ports can be enabled/disabled by BIOS setup

Graphics AGP 4X Support
Universal AGP Slot
Transfer rate up to 1 GB/s

Kdo pozna to firmo? Cena je 65.000 za vse skupaj (plata, ram, cpu)

plato ki ima via 266 ali sis! Jst sm tak pijan!

Ne kupuj QDIja. Raje kupi kakšno drugo plato s DDRjem, če iščeš poceni rešitev kupi ECS

jaz pa imam QDI kineti 7b pa mi zdej ko mam XP-je gor in neke nastavitve popravlene čist lepo dela
nič ne šteka-skor enkrat na tedn
men je uredu

Windi - model mal poglej nastavitve plate, jst sem primerjal moj sistem z sosedovim in ga v 3dmarku posekam - mava pa oba d800 in 256mb rama (on SDR in jaz DDR) pa jst mam KyroII in MX400.
Sam sem blazno zadovoljen z plato - edino mal mori ker se je ne da navijat. (ta vikend grem rezat povezave gor na procu, da bomo voltazo povecal he he).
Poleg tega sem pa dvema kolegoma sestavil racunanik z eliktkami (en ma D800 drug XP1600) in ne morta prehvalt stabilnosti in hitrosti plate. Uporabljata pa sdram.