flešanje

1) zrihtaš original bios od grafe
2) ga "prerihtaš" (rabiš kšn bios editor), nastaviš nove hitrosti (za katere si 100% prepričan da delujejo tko kot morjo)
3) greš v "real dos" način in
4) rečeš flash me baby

a maš to radeona?
No to sem jaz dobo v odgovor za 9500pro:

You will need to make a bootable DOS disk. Once you have that done, copy all of the atiflash files over to the bootable DOS disk. When you reboot your computer with the bootable floppy disk at the A:\ prompt type:

atiflash -s 0 original.bin (That is a ZERO not an "o". This will backup your original BIOS).

Once you have your original BIOS saved, type:

atiflash -f -p 0 9500_30.BIN (That is a ZERO not an "o". This will flash the new BIOS. If you had a card with 3.3ns Infineon memory, you would use 9500_33.BIN instead of 9500_30.BIN).

Mogoče še tale tema: Overclockan BIOS za Radeon 9100 128 Mb DDR......