Amis Technicolor TG788 in WRT54GL kot range extender

Pozdravljeni!

Na WRTju sem nastavil vse parametre da postane range extender, v modemu od Amisa pa ne najdem nastavitev, da bi se videla med seboj. Obstaja kakšna rešitev?

Delal sem po teh navodilih:
How do I use WDS?
Here's an example basic 2-router setup as configured in the Basic/Network page:

#1 - 00:11:11:11:11:11
The WAN port of this router is connected to the Internet.
WAN
(configure normally)

LAN
IP Address = 192.168.1.1
DHCP Server = enabled

Wireless
Wireless Mode = Access Point + WDS
SSID = samessid
Channel = 3
Security = WPA Personal
Encryption = AES
Shared Key = samesharedkey
WDS = Link With
MAC Address = 00:22:22:22:22:22 (the *wireless* MAC of the 2nd router)

#2 - 00:22:22:22:22:22
The WAN port of this router is not used.
WAN
Type = Disabled

LAN
IP Address = 192.168.1.2
Default Gateway = 192.168.1.1 (the 1st router's IP address)
Static DNS = 192.168.1.1 (the 1st router's IP address or any DNS server)
DHCP Server = Disabled (the 1st router handles it)

Wireless
Wireless Mode = Access Point + WDS
SSID = samessid
Channel = 3
Security = WPA Personal
Encryption = AES
Shared Key = samesharedkey
WDS = Link With
MAC Address = 00:11:11:11:11:11 (the *wireless* MAC of the 1st router)

Zatakne se pri vnosu MAC od repeaterja v modem od amisa.

Če ne rabi bit ravno wds..

Daš na wrt54gl dd-wrt fw ter samo daš repeater ali pa repeater bridge....Na Amis Technicolor TG788 pa ne rabiš ničesar nastavljat
http://www.dd-wrt.com/wiki/index.php/Li...