Wlan signal na odboj (ni vidne linije)?

Če leseno hišo poliješ z vodo ali oviješ v alu folijo bo signal mogoče ok.

Najbolje bi bilo da bi v tisti 2 hiši postavil router, ki bi deloval kot dostopna točka, ter se povežeš nanj. Izvedba malo verjetna če nimaš nobenega dobrega prijatelja v tej hiši. Drugače pa satelitvska antena kot je omenil Spajky

Lahko kupiš usmerjeni anteni za na router ter na adapter, jaz imam Alfa 036NH nanjo, pa je zelo dobra. Pa probaš kakšen signal imaš

Spajky je 22. jul 2013 ob 17:07 izjavil:

Yacked2 je 22. jul 2013 ob 12:19 izjavil:

...probaš kakšen signal imaš...

Kakšen signal (RF jakost-to se prikazuje!) ne pomeni NIČ !!! ker je v njem lahko tudi brdo motenj. Signala bo lahko imel dovolj, priklopit pa se ne bo mogel ali bo katastrofičen prenos s prekinjanji ...

S/N ratio je bistveno bolj pomemben, najbolj pa statistika prejetih in oddanih paketkov : koliko je bilo okvarjenih in so se morali pošiljat na novo (CRC errors! v paketkih) ... to je ponavadi v software-ju kartice za pogledat "live" ...

Govoril sem o RXQ:
"Its measured over all management and data frames. The received frames contain a sequence number which is added by the sending access point. RXQ = 100 means that all packets were received from the access point in numerical sequence and none were missing. That's the clue, this allows you to read more things out of this value. Lets say you got 100 percent RXQ and all 10 (or whatever the rate) beacons per second coming in. Now all of a sudden the RXQ drops below 90, but you still capture all sent beacons. Thus you know that the AP is sending frames to a client but you can't hear the client nor the AP sending to the client (need to get closer). Another thing would be, that you got a 11MB card to monitor and capture frames (say a prism2.5) and you have a very good position to the AP. The AP is set to 54MBit and then again the RXQ drops, so you know that there is at least one 54MBit client connected to the AP."

Prreveriš ga z airodump-ng