[Ubuntu] Samba

Na starem računalniku imam inštaliran Ubuntu Server 10.10, sedaj bi rad inštaliral sambo, da bi delil datoteke z ostalimi win mašinami v hiši. Sinoči sem se malo igral s tem, niti nisem vedel kaj točno počnem zato sem želel celoten program izbrisati in na novo naložiti.

Problem je, da ukaz

sudo apt-get remove samba

ne deluje, niti

sudo apt-get remove --purge samba

Kasneje sem prebral, da moram zaustaviti samba servis z ukazom

sudo /etc/init.d/samba stop

Zopet problem: tega v tem direktoriju ni. Če sem pravilno razumel je edino kar je v tem direktoriju povezano s sambo samo smbd.
Tudi če želim ponovno inštalirati z ukazom

sudo apt-get install samba

mi javi napako, češ da določen proces že teče.

Ima kdo kakšno idejo kako se naj rešim iz tega?

Ker spodnji ukaz pred spreminjanjem smb.conf ni deloval, sem sklepal da je nekaj narobe.

sudo /etc/init.d/samba stop

Ok, to sem do zdaj (seveda nespešno) poskušal. Čisto spodaj piše nekaj o procesu 1099. Ga moram ubiti in bo nato delovalo?

user@server:~$ sudo service smbd stop
stop: Unknown instance:

user@server:~$ sudo /etc/init.d/samba stop
sudo: /etc/init.d/samba: command not found

user@server:~$ sudo /etc/init.d/smbd stop
sudo: /etc/init.d/smbd: command not found

user@server:~$ sudo apt-get remove samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package samba is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 106 not upgraded.

user@server:~$ sudo apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
  openbsd-inetd inet-superserver smbldap-tools ldb-tools
The following NEW packages will be installed:
  samba
0 upgraded, 1 newly installed, 0 to remove and 106 not upgraded.
Need to get 0B/7,450kB of archives.
After this operation, 21.1MB of additional disk space will be used.
Preconfiguring packages ...
Selecting previously deselected package samba.
(Reading database ... 44941 files and directories currently installed.)
Unpacking samba (from .../samba_2%3a3.5.4~dfsg-1ubuntu8.2_i386.deb) ...
Processing triggers for man-db ...
Processing triggers for ufw ...
Processing triggers for ureadahead ...
ureadahead will be reprofiled on next reboot
Setting up samba (2:3.5.4~dfsg-1ubuntu8.2) ...
update-alternatives: using /usr/bin/smbstatus.samba3 to provide /usr/bin/smbstatus (smbstatus) in auto mode.
smbd start/running, process 1099
start: Job failed to start

Uporabil sem tvojo konfiguracijo smb.conf datoteke in jo shranil. Zakaj ukaz

sudo /etc/init.d/samba restart

ne deluje?
Javi, da ne najde tega v tem direktoriju.

Se pravi da ti odgovorim na vprašanje zakaj ukaz (sudo /etc/init.d/samba restart) ne deluje.

Za to, ker se je takšen ukaz uporabljal v različicah Ubuntu pred Lucid Lynx!

blkid /dev/mdm1 najbrž ...potem pa poglej v fstab, kako imaš zapise za ostale particije in skopiraj eno tisto z UUID, s tem, da vpišeš tega, katerega si dobil za raid....

master:~# blkid /dev/sdb1
/dev/sdb1: UUID="23d73afd-11ec-421d-9727-7966930fc2bf" SEC_TYPE="ext2" TYPE="ext3"
master:~# tail /etc/fstab
UUID=67510c51-a4c9-484b-8075-26c8f9c4e413 /boot ext3 defaults 0 1
UUID=23d73afd-11ec-421d-9727-7966930fc2bf /backup ext3 defaults 0 1

dela še po starem načinu. Pri novem je malce tečno, če ne veš na pamet imena servica :)

Kaj moram vnesti v fstab, da lahko mountam to raid polje?

user@server:~$ sudo mdadm --detail /dev/md0
[sudo] password for user:
/dev/md0:
        Version : 00.90
  Creation Time : Fri Jan  7 23:56:07 2011
     Raid Level : raid0
     Array Size : 3884566400 (3704.61 GiB 3977.80 GB)
   Raid Devices : 2
  Total Devices : 2
Preferred Minor : 0
    Persistence : Superblock is persistent

    Update Time : Fri Jan  7 23:56:07 2011
          State : clean
 Active Devices : 2
Working Devices : 2
 Failed Devices : 0
  Spare Devices : 0

     Chunk Size : 64K

           UUID : 432ea7e3:8753b2b8:01e1e969:8df5d8d3
         Events : 0.1

    Number   Major   Minor   RaidDevice State
       0       8        4        0      active sync   /dev/sda4
       1       8       18        1      active sync   /dev/sdb2

Še vsebina fstab:

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda1 during installation
UUID=6fbce8f4-f7e4-4c77-8121-78d981a905ec /               ext4    errors=remount                   -ro 0       1
# /boot was on /dev/sda2 during installation
UUID=5a2964b2-d36a-4938-9aa4-8bdb0a6c37dc /boot           ext4    defaults                           0       2
# swap was on /dev/sda3 during installation
UUID=30b0fb82-8466-4158-97b1-f8a47d46a665 none            swap    sw                                 0       0
# swap was on /dev/sdb1 during installation
UUID=f71b8ce5-1f6b-0070-054f-b198508044c8 none            swap    sw                                 0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0