Pomoč Prosim Vista!

Heh? "Padel mi je na tla iz 50 cm" KDO? disk al ceu komp?:D

mala00 je 3. feb 2010 ob 12:57 izjavil:

komp! a nobenemu se nič ne sanja kaj je narobe?

Poškodba diska, verjetno ne bo več dolgo berljiv... Spušča kakšne "čudne" zvoke mogoče?

Mislite mislite o tem ima namreč isto težavo kot jaz ? (Last night my computer worked fine. On switching it on this morning, I get the error message:"A disk read error occurred Press Ctrl + Alt + Del to restart")

If I press Ctrl+Alt+Del, it just returns to the same screen.
For those of you having this problem, Here's your answer: Make sure that the black jumper in the back of your main hard drive is set to "MA" (MASTER) as abbreviated according to the schematics shown on top of your hard drive. (On the sticker at the bottom.) Any other drives that you have such as your CD-ROM, DVD-ROM must be placed as "SL" (SLAVE) as abbreviated on the back of them. (These abbriviated letterings are stamped in the metal or plastic part in the back, it can be hard to see, use a flashlight to get a good look at it. Those of you have different brand computers, need to get into the BIOS. First, when you first turn on the computer, the post boot screen will come on, look for where it will tell you what key to press to get into the BIOS. All systems are different, some are done by pressing the F2 key, or the F11 key, others are the DEL key. On Compaqs and HP, uses the F11 key, Dells and other systems uses the F2 key. Barebone systems uses the DEL key. Once you are in the BIOS, you need to find the section on the Boot Order. Make sure the the HDD is placed as the first boot priority before any others in the listing, which means your main hard drive must be placed as a first boot device before any others that is listed.The boot order should be placed in the following order:

1. HDD (Hard Disk Drive)

2. CD-ROM

3. FDD or NET or the like. (The 3rd boot order can also be disabled by selecting it.)

NE!!! res ne morem nič storit? če pa setup mi dela!

Xserces je 3. feb 2010 ob 14:53 izjavil:

overlord_tm je 3. feb 2010 ob 14:44 izjavil:

Obstaja par firm ki se ukvarja z resevanjem podatkov. Kotar iz LJ, Maitim iz Kamnika ...

najbolje da to nardis kakor hitro se da... da ne bo dokoncno crknu...
ali pa ce probas na drugem racunalniku... ce dela isto


1. Run CHKDSK /R /P from the recovery console (it will typically find no error)
2. run FIXBOOT from recovery console (typically has no result)
3. run FIXMBR from recovery console (typically has no result)
4. Run the manufacturer's diagnostic utility, downloaded from their website (it will typically find no error)
5. Changing the drives from cable select to Master/Slave may fix it.
6. Replacing the data cable may fix it, but usually not.
7. Setting the BIOS to use defaults may fix it, but usually not.
8. Changing the BIOS drive settings from auto to user-specified, ensuring that LBA is selected may fix it.
9. Pulling the CMOS battery to let the BIOS lose it settings may work.

in poglej se kablovje...

No drugače pa disk se da dobro rešit. Poznam enga k je nesu rešt in je blo rešeno 95% usega kar je blo gor.

Odvisno od resnosti okvare diska. Ponavadi ga najprej pošlješ v diagnostiko, ki stane okoli 20 - 30EUR, in ti sporočijo predvideno ceno.

Predvidevam da je odvisno tudi od tega koliko MB podatkov je treba resit :)

Drago je bit brez backupov :)

Jah, napol zastonj ti ne bo nihče tega delal. Diagnostika je v konkretnem primeru res kar draga, cene same obnove pa so dokaj realne.
Obnova težko poškodovanih diskov (ogenj ipd.), se lahko povzpnejeo krepko čez 1000EUR.