Ubuntu vprašanja @ Slo-Tech

Forum » Operacijski sistemi »
Ubuntu vprašanja

Ubuntu vprašanja

Robocop1 :: 21. dec 2009, 17:28

Imam naslednji računalnik: AMD Sempron 2800+ 1,5GB DDR RAM, ATI Radeon 9600; Ubuntu 8.10 in Win XP.

1) Med uporabo se mi zgodi, da računalnik zamrzne. Tudi kazalec od miške izgine z zaslona, računalnik se noče odzivati; če poslušam muzko, pa tudi ta zašteka ... zgodi se podobno kot z slabim audio CD - preskakovanje. V tem primeru mi ostane samo še reset. Potem ko sem namestil Ubuntu, sem vključil še gonilnike za grafično (tisto kar je pač samo najdlo) in kodeke za zvočno. Mogoče kdo ve, kaj bi povzročalo to napako? Kolikor sem gledal, se mi to dogaja takrat, ko je zasedenega več RAM-a. Win XP pa dela normalno.

2) Malce "čuden" se mi zdi izklop računalnika. Recimo na Win XP se hkrati izklopi vsa računalnik - vključno z diski. Pri Ubuntu pa izklop zgleda takole: računalnik se izklopi (vsaj lučke na kišti se izklopijo), diski pa se še nekaj časa vrtijo - dokler se sami ne ustavijo. Uglavnem isto, kot če bi izklopil stikalo na napajalniku - nepravilen izklop. Zanima me samo ali je to v redu, da se tako izklaplja, ali ima Ubuntu kakšne "probleme" pri zaustavitvi strojne opreme? Bi moral še sam kakšne nastavitve popravit?

schtr4jh :: 21. dec 2009, 19:50

1) pretestiraj rame s programom MemTest86 (zapeči na cd kot sliko in bootaj ob zagonu računalnika)

Robocop1 :: 21. dec 2009, 20:10

RAMi so v redu. Prav zaradi tega sem napisal, da na Win XP dela OK. Najprej sem sicer mislil, da imam premalo RAMa (sprva sem ga imel samo 512MB), kasneje pa sem dodal še 1GB, a se stvar še naprej ponavlja.
Čudno mi pa je, da če računalnik pustim nekaj časa (ga ne uporabljam - pač prosto delovanje - prazno namizje), se to ne dogaja, vsaj do zdaj se še ni.

5er--> :: 21. dec 2009, 20:28

Kaj, če bi raje poizkusil z eno leto novejšim (k)ubuntu 9.10?

Robocop1 :: 21. dec 2009, 20:47

To sem tudi sam že razmišljal. Po drugi strani pa imam spet pomisleke - kaj pa če bo tam isto, ali pa bodo kaki drugi problemi. Glede na to, da sem nedolgo nazaj komaj namestil sistem, bom še malo vztrajal, če slučajno najdem krivca.

Je možno da je sem namestil kaj takega, česar ne bi smel?
Še kakšna ideja?

5er--> :: 22. dec 2009, 01:46

Komaj namestil? Kaj si pa moral delat? Ni bilo vse več ali manj klik and play?
Sicer pa posnameš CD in probaš. Če dela Live varjanta, bo delalo tudi, če je stvar na disku.

Robocop1 :: 22. dec 2009, 13:03

Res je klik & play. S tem sem mislil, da imam Ubuntu komaj en mesec na compu in se mi nesmiselno zdi takoj vse od začetka.
Samo ena stvar mi ne gre v račun: Videl sem že računalnik s 512MB RAMa in 2500+ procesor, pa je delalo vse OK, ne vem pa zakaj meni ne. Poskusil sem tudi Live CD in tudi tam dela OK.

Tear_DR0P :: 24. dec 2009, 10:32

na ubuntu 8.10 so bli neki problemi s pulse audio - v Kiberpipi smo jih na veliko doživljali, potem smo onemogočili PA in je vse delalo - na koali pa tega še nisem izkusil
http://ubuntuforums.org/archive/index.p... - na prvi šus najdem tole

"Figures don't lie, but liars figure."
Samuel Clemens aka Mark Twain

Robocop1 :: 27. dec 2009, 16:47

Moram reči, da mi na laptopu veliko bolje dela Ubuntu 9.04, kot pa prej 8.10. Na stacionarnem računalniku pa še vedno uporabljam 8.10 verzijo - dokler bo zdržala, potem bom poskusil 9.04.

Pa še eno vprašanje imam: Danes sem po nerodnosti med delovanjem računalnika (na Ubuntu) izštekal napajalni kabel iz napajalnika. Računalnik se je seveda ugasnil, a ko sem ga ponovno prižgal, sem opazil, da se je resetiral BIOS. Vsaj tako sem razumel sporočilo (ki se je pokazalo po dveh kratkih piskih). Pisalo je "Bad BIOS checksum. Press F2 ..." ali nekaj takega. Zdaj stvar dela OK.

Čudno mi pa je, kako je do tega prišlo? Je možno, da Ubuntu dostopa do CMOS RAMa, ali imam kakšen drugi problem?

schtr4jh :: 27. dec 2009, 17:54

Preveri baterijo na matični plošči.

brodul :: 28. dec 2009, 14:01

IMO je 8.10 najslabše, kar lahko imaš. Že zaradi tega ker ima slabo podporo. Dosti bolje, če potegneš dol Koalo (9.10), ki je najnovejša ali pa greš korak nazaj in si naložiš LTS 8.04 .

Jst bi poskusil srečo z LTS 8.04 . Če prav ti bo računalnik odlično delal tudi z 9.10 (vsaj po hardwaru) .

Mogoče veš katero matično imaš?

Pretending to be a mature adult is so exhausting.

hojnikb :: 28. dec 2009, 14:35

Probaj delat sam z tanovim 1gb ramom.Mogč je tist star 512mb ram hin ..

#brezpodpisa

Zgodovina sprememb…

spremenil: hojnikb (28. dec 2009 ob 14:36)

Robocop1 :: 28. dec 2009, 14:57

Najprej glede baterije: je OK, sicer pa bi mi že prej ura zaostajala. Pa tudi med nalaganjem Ubunta sem dobil sporočilo, da so morda na BOOT particiji napake. Zdaj zaenkrat dela vse OK. Ne vem pa kaj je to povzročilo.

Glede RAMa (512MB DDR333): je OK, sicer mi tudi Windowsi ne bi delali, oz. bi dobil kakšno obvestilo v BIOSu. Tudi s samo 1GB (DDR400) sem probal, pa je isto.

Rad bi pogruntal, zaradi česa rač. zmrzuje. Lahko sicer poskusim tudi z 9.10 verzijo. Kaj pa če se stvar ponovi? Bom moral spet poskusit 10.04 verzijo (ko izide)?

Je možno da matična sploh ni združljiva s tem softwerom? V prospektih namreč piše: Compatible Win 98/Win 2000/Win XP. Ali je to mišljeno samo za gonilnike, ki sem jih zraven dobil?

Obstaja na Ubuntu kakšen t.i. "safemode" kot na Win XP, kjer bi lahko preveril, da slučajno kakšen proces tega ne povzroča? Kaj pa če onemogočim vizualne učinke - je morda to krivo?

hojnikb :: 28. dec 2009, 15:41

Zaka pa rajši ne probaš kake druge Linux distribucije ?

#brezpodpisa

Robocop1 :: 29. dec 2009, 00:09

Hmmm... težko vprašanje ... kot če bi vprašal "zakaj še vedno delam z XP-ji".
Pač se mi zdi, da od vseh linux distribucij znam še najbolj delat z Ubuntom. Razmišljal sem že tudi o Fedori ali pa Kubuntu, ampak najprej probam usposobit Ubuntu, potem pa mogoče pride katera druga distribucija Linuxa.

Kako pa bi se sploh kaj obnesla Fedora (ali Kubuntu) na takem računalniku? Bi solidno delalo ali bi moral malo nadgradit računalnik? Katero distribucijo pa mi ostali kaj priporočate?

brodul :: 29. dec 2009, 18:18

Kot sem že zgoraj napisal potegni dol Koalo (ubuntu 09.10).

http://www.ubuntu.com/getubuntu/download

Računalo ne rabi nadgradnje.

Ne vidim razloga zakaj bi kubuntu deloval kaj bolje .

Gnome (ubuntu) okolje je bolj podobno okolju iz Windowsov XP, kot KDE (kubuntu).

Če si še vedno Windows user ti ne priporočam nič drugega kot Ubuntu. Stvari magic delajo ,komaj se boš dotaknil ukazne vrstice.

Če te bo linux naudušil boš že sam ugotovil katera distribucija ti najbolj paše, sam imam za desktop Ubuntu, Debian in Gentoo , pridružil se mu bo pa še Arch. Itak lahko sprobavaš, kaj ti najbolj ustreza.

Pretending to be a mature adult is so exhausting.

5er--> :: 29. dec 2009, 19:18

Gnome (ubuntu) okolje je bolj podobno okolju iz Windowsov XP, kot KDE (kubuntu).

Meni se zdi ravno obratno. Sem na ene par PC-jev v "javni uporabi" namestil kubuntu 9.10, večina misli da je gor Windows 7.

brodul :: 29. dec 2009, 20:06

Sej pravim XP. :D

Windows7 so se vrgli po Mac u. Vsaj tak obcutek sem imel jaz letos Aprila v Kiberpipi, kjer je predaval Mario Briana. Takrat sem jih na zadje videl ( ni blo se casa nalozit tega v Virtual box pa pri meni nebi sel :D )

Konec koncev je itak vseeno. Kak videz ima desktop. Vsaj meni. >D

Pretending to be a mature adult is so exhausting.

winlins :: 1. jan 2010, 12:57

Naloži si Debiana. Ubuntu je izšel iz njega tako da ni velike razlike vsi ukazi v terminalu so pa tudi isti, dobiš ga na netu velik je 180 MB ko ga pa nalagaš ti pa avtomatično downloada še potrebne pakete k sistemu.
Če se pa dobro spomnim je pa moj prof. za prakso imel iste težave mislim da je napaka v strojni opreme probaj dat vse skupaj na drug računalnik ali pa druga verzija Ubuntuja.

Zgodovina sprememb…

spremenil: winlins (1. jan 2010 ob 13:03)

M@73Y :: 1. mar 2010, 21:47

Pozdrav. Da ne odpiram nove teme.
Doma imam nameščen ubuntu 8.10. Deluje vse Ok, samo problem nastane ko je potrebno prenesti iz interneta razne vtičnike za glasbene, video datoteke in ostale reči. Problem je ker na tem računalniku nimam možnosti interneta, zato me zanima ali obstaja kakšen skupek gonilnikov in vtičnikov, ali je res potrebno biti nujno povezan na internet.
Hvala za odgovore,
Matej

..jump into psytrance tunnel..

Gapi :: 2. mar 2010, 01:25

Lahko jih na roko vlečš dol iz neta.In z dpkg inštaliraš na ta komp. http://ftp.arnes.si/pub/mirrors/ubuntu/
Največji problem bo poiskat vse in vse kar je potrebno.

Aja paketa vse v enem ni.

Zgodovina sprememb…

spremenil: Gapi (2. mar 2010 ob 01:26)

Tear_DR0P :: 2. mar 2010, 09:29

Aja paketa vse v enem ni.

tehnično gledano je :)

namesti si VLC ali mplayer

"Figures don't lie, but liars figure."
Samuel Clemens aka Mark Twain

M@73Y :: 2. mar 2010, 09:52

Oj, hvala za odgovore. Torej preostane mi le, ko bo ubuntu zahteval kakšen kodek, da si to zapišem in ob priložnosti dolpotegnem iz interneta.
Lp.

..jump into psytrance tunnel..

Daedalus :: 2. mar 2010, 10:48

Doma imam nameščen ubuntu 8.10. Deluje vse Ok, samo problem nastane ko je potrebno prenesti iz interneta razne vtičnike za glasbene, video datoteke in ostale reči. Problem je ker na tem računalniku nimam možnosti interneta, zato me zanima ali obstaja kakšen skupek gonilnikov in vtičnikov, ali je res potrebno biti nujno povezan na internet.

gstreamer0.10-plugins paketi skrbijo večinoma za multimedijo - gstreamer0.10-plugins-good, gstreamer0.10-plugins-bad, gstreamer0.10-plugins-ugly (imena so ustrezna glede na licenčne/patentne ovire pri distibuciji/uporabi). Pa VLC se splača meti poleg.

Man is condemned to be free; because once thrown into the world,
he is responsible for everything he does.
[J.P.Sartre]

Hexx :: 5. mar 2010, 13:31

Da ne odpiram nove teme, katero Linux distribucijo priporočate za prenosnik s 1gb rama in dvojedernim intelom 1.6? pa naj bo bolj za začetnike

Hvala :)

Pinzl :: 9. mar 2010, 22:19

Živjo!

Upam da mi boste lahko pomagali. Kupil sem prenosnik HP 4515s in poleg WIN7 sem si z wubijem naložil še ubuntu 9.1. Problem je da mi ne dela wireless(splloh ne zazna opreme).
Zanima me je kje v menijih nekakšen "device manager" in pa ali kdo ve za kakšno rešitev, kjer bi lahko gonilnik za to inštaliral bolj "easy" ker nekaj kar sem našel na internetu je komplicirano ko hudič :'(

Hvala!

popster :: 9. mar 2010, 22:22

nadgradi vsaj kernel če nočeš nove distribucije

@hexx za začetnike ubuntu ali mint
@lulček če ni driverjev jih boš moral poiskat na netu, installirat,
naj bi šlo za download+open (če dobiš stvar skompilano)

Zgodovina sprememb…

spremenilo: popster (9. mar 2010 ob 22:24)

PaX_MaN :: 9. mar 2010, 22:28

@DJ lulček: tale navodila ne bi smela biti pretežka. Če ne delajo, pa še malce bolj obsežna.

Zgodovina sprememb…

spremenilo: PaX_MaN (9. mar 2010 ob 22:30)

brodul :: 13. mar 2010, 21:00

@DJ lulček

Poveži se preko žične povezave ter posodobi sistem.

Pretending to be a mature adult is so exhausting.

Gogo :: 13. mar 2010, 21:27

Zdravo
Imam manjši problem na mojem Ubuntu 9.10 sistemu (AMD Barton 2500, Saphire 9600xt in WD 320GB).
Namreč zagon traja zeeeeloooo dolgo. Najprej se prikaže črn ekran in kursor samo utripa, čez minuto ali dve se pokaže Ubuntu logo ter se zažene zeeelooo počasi.
Kak nasvet, da pohitrim zadevo je zelo dobrodošel.

thx folk.

popster :: 14. mar 2010, 14:13

@gogo mozno da je kaj z hardwarje, si probal z kakim drugo live cd distribucijo?

zee :: 14. mar 2010, 14:44

Trdi disk? Kaj pravi dmesg?

zee
Linux: Be Root, Windows: Re Boot
Giant Amazon and Google Compute Cloud in the Sky.

Gogo :: 15. mar 2010, 12:17

Sorry za zamudo. Delo najprej.
Tule je izpis:

[    0.101309] PCI: Using configuration type 1 for base access
[    0.102438] bio: create slab <bio-0> at 0
[    0.103362] ACPI: EC: Look up EC in DSDT
[    0.110953] ACPI: Interpreter enabled
[    0.110959] ACPI: (supports S0 S1 S4 S5)
[    0.110986] ACPI: Using IOAPIC for interrupt routing
[    0.120085] ACPI: No dock devices found.
[    0.120207] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.120260] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[    0.120279] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[    0.120504] pci 0000:00:01.1: reg 10 io port: [0xe400-0xe41f]
[    0.120542] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.120547] pci 0000:00:01.1: PME# disabled
[    0.120582] pci 0000:00:02.0: reg 10 32bit mmio: [0xe9000000-0xe9000fff]
[    0.120619] pci 0000:00:02.0: supports D1 D2
[    0.120622] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120627] pci 0000:00:02.0: PME# disabled
[    0.120656] pci 0000:00:02.1: reg 10 32bit mmio: [0xe9001000-0xe9001fff]
[    0.120693] pci 0000:00:02.1: supports D1 D2
[    0.120696] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120701] pci 0000:00:02.1: PME# disabled
[    0.120736] pci 0000:00:02.2: reg 10 32bit mmio: [0xe9002000-0xe90020ff]
[    0.120779] pci 0000:00:02.2: supports D1 D2
[    0.120782] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120787] pci 0000:00:02.2: PME# disabled
[    0.120824] pci 0000:00:04.0: reg 10 32bit mmio: [0xe9003000-0xe9003fff]
[    0.120831] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe007]
[    0.120865] pci 0000:00:04.0: supports D1 D2
[    0.120867] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120872] pci 0000:00:04.0: PME# disabled
[    0.120941] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f]
[    0.121060] pci 0000:01:08.0: reg 10 io port: [0xa000-0xa01f]
[    0.121147] pci 0000:01:08.1: reg 10 io port: [0xa400-0xa407]
[    0.121247] pci 0000:00:08.0: bridge io port: [0xa000-0xbfff]
[    0.121252] pci 0000:00:08.0: bridge 32bit mmio: [0xe8000000-0xe8ffffff]
[    0.121291] pci 0000:03:00.0: reg 10 32bit mmio: [0xc0000000-0xcfffffff]
[    0.121298] pci 0000:03:00.0: reg 14 io port: [0xd000-0xd0ff]
[    0.121305] pci 0000:03:00.0: reg 18 32bit mmio: [0xe7000000-0xe700ffff]
[    0.121324] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[    0.121345] pci 0000:03:00.0: supports D1 D2
[    0.121375] pci 0000:03:00.1: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[    0.121383] pci 0000:03:00.1: reg 14 32bit mmio: [0xe7010000-0xe701ffff]
[    0.121417] pci 0000:03:00.1: supports D1 D2
[    0.121460] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[    0.121465] pci 0000:00:1e.0: bridge 32bit mmio: [0xe6000000-0xe7ffffff]
[    0.121470] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xc0000000-0xdfffffff]
[    0.121481] pci_bus 0000:00: on NUMA node 0
[    0.121487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.121626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.121868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.174855] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.175016] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.175176] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.175335] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.175492] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.175652] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.175814] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.175975] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.176139] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.176297] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.176455] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.176614] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.176773] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.176933] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177091] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177248] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.177393] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[    0.177521] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[    0.177648] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[    0.177774] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[    0.177912] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.178098] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.178292] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[    0.178477] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.178662] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[    0.178846] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[    0.179031] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[    0.179160] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[    0.179348] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.179532] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[    0.179716] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[    0.179901] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.180161] SCSI subsystem initialized
[    0.180259] libata version 3.00 loaded.
[    0.180369] usbcore: registered new interface driver usbfs
[    0.180385] usbcore: registered new interface driver hub
[    0.180422] usbcore: registered new device driver usb
[    0.180595] ACPI: WMI: Mapper loaded
[    0.180597] PCI: Using ACPI for IRQ routing
[    0.180788] Bluetooth: Core ver 2.15
[    0.180826] NET: Registered protocol family 31
[    0.180829] Bluetooth: HCI device and connection manager initialized
[    0.180833] Bluetooth: HCI socket layer initialized
[    0.180836] NetLabel: Initializing
[    0.180838] NetLabel:  domain hash size = 128
[    0.180841] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.180858] NetLabel:  unlabeled traffic allowed by default
[    0.183477] pnp: PnP ACPI init
[    0.183501] ACPI: bus type pnp registered
[    0.189803] pnp: PnP ACPI: found 16 devices
[    0.189806] ACPI: ACPI bus type pnp unregistered
[    0.189811] PnPBIOS: Disabled by ACPI PNP
[    0.189831] system 00:00: ioport range 0x4000-0x407f has been reserved
[    0.189835] system 00:00: ioport range 0x4080-0x40ff has been reserved
[    0.189839] system 00:00: ioport range 0x4400-0x447f has been reserved
[    0.189843] system 00:00: ioport range 0x4480-0x44ff has been reserved
[    0.189847] system 00:00: ioport range 0x4200-0x427f has been reserved
[    0.189851] system 00:00: ioport range 0x4280-0x42ff has been reserved
[    0.189858] system 00:01: ioport range 0x5000-0x503f has been reserved
[    0.189862] system 00:01: ioport range 0x5100-0x513f has been reserved
[    0.189870] system 00:02: iomem range 0xd5800-0xd7fff has been reserved
[    0.189874] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[    0.189878] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[    0.189882] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
[    0.189886] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved
[    0.189890] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved
[    0.189895] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[    0.189899] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved
[    0.189903] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.189907] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.189914] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.189918] system 00:04: ioport range 0x800-0x805 has been reserved
[    0.189922] system 00:04: ioport range 0x290-0x297 has been reserved
[    0.224627] AppArmor: AppArmor Filesystem Enabled
[    0.224653] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[    0.224657] pci 0000:00:08.0:   IO window: 0xa000-0xbfff
[    0.224664] pci 0000:00:08.0:   MEM window: 0xe8000000-0xe8ffffff
[    0.224669] pci 0000:00:08.0:   PREFETCH window: disabled
[    0.224678] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.224682] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.224688] pci 0000:00:1e.0:   MEM window: 0xe6000000-0xe7ffffff
[    0.224693] pci 0000:00:1e.0:   PREFETCH window: 0xc0000000-0xdfffffff
[    0.224706] pci 0000:00:08.0: setting latency timer to 64
[    0.224716] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.224719] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.224723] pci_bus 0000:01: resource 0 io:  [0xa000-0xbfff]
[    0.224727] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe8ffffff]
[    0.224731] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.224734] pci_bus 0000:03: resource 1 mem: [0xe6000000-0xe7ffffff]
[    0.224738] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xdfffffff]
[    0.224782] NET: Registered protocol family 2
[    0.224900] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.225374] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.226725] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.227383] TCP: Hash tables configured (established 131072 bind 65536)
[    0.227387] TCP reno registered
[    0.227511] NET: Registered protocol family 1
[    0.227603] Trying to unpack rootfs image as initramfs...
[    0.471117] Freeing initrd memory: 7467k freed
[    0.479823] cpufreq-nforce2: Detected nForce2 chipset revision A2
[    0.479827] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss.
[    0.479839] cpufreq-nforce2: FSB currently at 167 MHz, FID 11.0
[    0.479923] Scanning for low memory corruption every 60 seconds
[    0.480089] audit: initializing netlink socket (disabled)
[    0.480110] type=2000 audit(1268651286.480:1): initialized
[    0.490071] highmem bounce pool size: 64 pages
[    0.490079] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.491907] VFS: Disk quotas dquot_6.5.2
[    0.491975] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.492625] fuse init (API version 7.12)
[    0.492722] msgmni has been set to 1732
[    0.492965] alg: No test for stdrng (krng)
[    0.492982] io scheduler noop registered
[    0.492985] io scheduler anticipatory registered
[    0.492988] io scheduler deadline registered
[    0.493042] io scheduler cfq registered (default)
[    0.524067] pci 0000:03:00.0: Boot video device
[    0.524178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.524206] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.524366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.524372] ACPI: Power Button [PWRF]
[    0.524434] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.524438] ACPI: Power Button [PWRB]
[    0.524494] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.524503] ACPI: Sleep Button [SLPB]
[    0.524568] fan PNP0C0B:00: registered as cooling_device0
[    0.524575] ACPI: Fan [FAN] (on)
[    0.524978] processor LNXCPU:00: registered as cooling_device1
[    0.529380] thermal LNXTHERM:01: registered as thermal_zone0
[    0.529390] ACPI: Thermal Zone [THRM] (34 C)
[    0.529447] isapnp: Scanning for PnP cards...
[    0.728056] Switched to high resolution mode on CPU 0
[    0.883767] isapnp: No Plug & Play device found
[    0.885088] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.885228] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.885340] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.885665] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.885802] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.887037] brd: module loaded
[    0.887597] loop: module loaded
[    0.887704] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.888019] pata_amd 0000:00:09.0: version 0.4.1
[    0.888089] pata_amd 0000:00:09.0: setting latency timer to 64
[    0.888209] scsi0 : pata_amd
[    0.888337] scsi1 : pata_amd
[    0.889555] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.889560] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.890373] Fixed MDIO Bus: probed
[    0.890418] PPP generic driver version 2.4.2
[    0.890526] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.890861] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    0.890868]   alloc irq_desc for 22 on node -1
[    0.890871]   alloc kstat_irqs on node -1
[    0.890879] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22
[    0.890900] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    0.890904] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    0.890945] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    0.890985] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable
[    0.890994] ehci_hcd 0000:00:02.2: debug port 1
[    0.891000] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
[    0.891019] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe9002000
[    0.900018] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    0.900127] usb usb1: configuration #1 chosen from 1 choice
[    0.900165] hub 1-0:1.0: USB hub found
[    0.900179] hub 1-0:1.0: 6 ports detected
[    0.900243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.900582] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[    0.900587]   alloc irq_desc for 21 on node -1
[    0.900589]   alloc kstat_irqs on node -1
[    0.900596] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
[    0.900606] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.900611] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.900658] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.900685] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe9000000
[    0.958067] usb usb2: configuration #1 chosen from 1 choice
[    0.958099] hub 2-0:1.0: USB hub found
[    0.958113] hub 2-0:1.0: 3 ports detected
[    0.958472] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[    0.958477]   alloc irq_desc for 20 on node -1
[    0.958480]   alloc kstat_irqs on node -1
[    0.958485] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20
[    0.958495] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    0.958500] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    0.958538] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    0.958564] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe9001000
[    1.014063] usb usb3: configuration #1 chosen from 1 choice
[    1.014095] hub 3-0:1.0: USB hub found
[    1.014108] hub 3-0:1.0: 3 ports detected
[    1.014164] uhci_hcd: USB Universal Host Controller Interface driver
[    1.014264] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.014267] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.014655] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.014734] mice: PS/2 mouse device common for all mice
[    1.014875] rtc_cmos 00:06: RTC can wake from S4
[    1.014924] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.014952] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    1.015042] device-mapper: uevent: version 1.0.3
[    1.015155] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    1.015259] device-mapper: multipath: version 1.1.0 loaded
[    1.015262] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.015405] EISA: Probing bus 0 at eisa.0
[    1.015428] Cannot allocate resource for EISA slot 4
[    1.015431] Cannot allocate resource for EISA slot 5
[    1.015447] EISA: Detected 0 cards.
[    1.015526] cpuidle: using governor ladder
[    1.015529] cpuidle: using governor menu
[    1.016144] TCP cubic registered
[    1.016335] NET: Registered protocol family 10
[    1.016876] lo: Disabled Privacy Extensions
[    1.017281] NET: Registered protocol family 17
[    1.017303] Bluetooth: L2CAP ver 2.13
[    1.017306] Bluetooth: L2CAP socket layer initialized
[    1.017310] Bluetooth: SCO (Voice Link) ver 0.6
[    1.017312] Bluetooth: SCO socket layer initialized
[    1.017349] Bluetooth: RFCOMM TTY layer initialized
[    1.017354] Bluetooth: RFCOMM socket layer initialized
[    1.017356] Bluetooth: RFCOMM ver 1.11
[    1.017373] powernow-k8: Processor cpuid 6a0 not supported
[    1.017392] Using IPI No-Shortcut mode
[    1.017466] PM: Resume from disk failed.
[    1.017483] registered taskstats version 1
[    1.017618]   Magic number: 2:338:125
[    1.017702] acpi device:00: hash matches
[    1.017735] rtc_cmos 00:06: setting system clock to 2010-03-15 11:08:07 UTC (1268651287)
[    1.017739] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.017741] EDD information not available.
[    1.037116] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.244334] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448
[    1.244342] ata1.00: ATA-7: ST3320620A, 3.AAC, max UDMA/100
[    1.244346] ata1.00: 625142448 sectors, multi 16: LBA48 
[    1.244375] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c0c5) ACPI=0x3f01f (20:600:0x13)
[    1.288377] ata1.00: configured for UDMA/100
[    1.288534] scsi 0:0:0:0: Direct-Access     ATA      ST3320620A       3.AA PQ: 0 ANSI: 5
[    1.288677] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.288746] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.288816] sd 0:0:0:0: [sda] Write Protect is off
[    1.288820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.288856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.289040]  sda: sda1 sda2 < sda5 >
[    1.360728] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.516011] usb 2-1: new low speed USB device using ohci_hcd and address 2
[    1.728102] usb 2-1: configuration #1 chosen from 1 choice
[    2.036011] usb 2-2: new low speed USB device using ohci_hcd and address 3
[    2.262098] usb 2-2: configuration #1 chosen from 1 choice
[    6.484010] ata2: link is slow to respond, please be patient (ready=0)
[   11.300010] ata2: SRST failed (errno=-16)
[   16.496010] ata2: link is slow to respond, please be patient (ready=0)
[   21.312010] ata2: SRST failed (errno=-16)
[   26.508010] ata2: link is slow to respond, please be patient (ready=0)
[   56.356010] ata2: SRST failed (errno=-16)
[   61.384010] ata2: SRST failed (errno=-16)
[   61.384012] ata2: reset failed, giving up
[   61.384041] Freeing unused kernel memory: 540k freed
[   61.384679] Write protecting the kernel text: 4580k
[   61.384718] Write protecting the kernel read-only data: 1840k
[   61.591559] Linux agpgart interface v0.103
[   61.594453] agpgart: Detected NVIDIA nForce2 chipset
[   61.598700] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[   61.601298] Floppy drive(s): fd0 is 1.44M
[   61.631952] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   61.646332] FDC 0 is a post-1991 82077
[   61.654790] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   61.654801] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
[   61.654809] forcedeth 0000:00:04.0: setting latency timer to 64
[   61.654870] nv_probe: set workaround bit for reversed mac addr
[   61.802004] [drm] Initialized drm 1.1.0 20060810
[   61.860899] [drm] radeon default to kernel modesetting DISABLED.
[   61.861171] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   61.861179]   alloc irq_desc for 19 on node -1
[   61.861182]   alloc kstat_irqs on node -1
[   61.861192] pci 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[   61.861364] [drm] Initialized radeon 1.31.0 20080528 for 0000:03:00.0 on minor 0
[   61.868070] usbcore: registered new interface driver hiddev
[   61.874043] input: Juchin USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input5
[   61.874152] generic-usb 0003:1D57:000D.0001: input,hidraw0: USB HID v1.10 Mouse [Juchin USB Mouse] on usb-0000:00:02.0-1/input0
[   62.039826] generic-usb 0003:0419:8002.0002: hiddev96,hidraw1: USB HID v1.10 Device [Samsung Electronics Sam Sung Electronics] on usb-0000:00:02.0-2/input0
[   62.039849] usbcore: registered new interface driver usbhid
[   62.039853] usbhid: v2.6:USB HID core driver
[   62.172960] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x57d @ 1, addr 00:50:70:92:16:ed
[   62.172967] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[   91.816019] ata1: lost interrupt (Status 0x50)
[   91.816046] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   91.816058] ata1.00: cmd c8/00:00:00:00:00/00:00:00:00:00/e0 tag 0 dma 131072 in
[   91.816060]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[   91.816064] ata1.00: status: { DRDY }
[   91.816094] ata1: soft resetting link
[   92.164360] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c0c5) ACPI=0x3f01f (20:600:0x13)
[   92.209300] ata1.00: configured for UDMA/100
[   92.209307] ata1.00: device reported invalid CHS sector 0
[   92.209318] ata1: EH complete
[  123.816023] ata1: lost interrupt (Status 0x50)
[  123.816053] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  123.816065] ata1.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
[  123.816068]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[  123.816072] ata1.00: status: { DRDY }
[  123.816103] ata1: soft resetting link
[  124.168361] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c0c5) ACPI=0x3f01f (20:600:0x13)
[  124.213158] ata1.00: configured for UDMA/100
[  124.213164] ata1.00: device reported invalid CHS sector 0
[  124.213176] ata1: EH complete
[  124.446618] PM: Starting manual resume from disk
[  124.446624] PM: Resume from partition 8:5
[  124.446626] PM: Checking hibernation image.
[  124.446813] PM: Resume from disk failed.
[  124.482343] EXT4-fs (sda1): barriers enabled
[  124.505645] kjournald2 starting: pid 356, dev sda1:8, commit interval 5 seconds
[  124.505689] EXT4-fs (sda1): delayed allocation enabled
[  124.505693] EXT4-fs: file extents enabled
[  124.552275] EXT4-fs: mballoc enabled
[  124.552301] EXT4-fs (sda1): mounted filesystem with ordered data mode
[  125.133532] type=1505 audit(1268651411.614:2): operation="profile_load" pid=380 name=/usr/share/gdm/guest-session/Xsession
[  125.136693] type=1505 audit(1268651411.618:3): operation="profile_load" pid=381 name=/sbin/dhclient3
[  125.137053] type=1505 audit(1268651411.618:4): operation="profile_load" pid=381 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[  125.137256] type=1505 audit(1268651411.618:5): operation="profile_load" pid=381 name=/usr/lib/connman/scripts/dhclient-script
[  125.190926] type=1505 audit(1268651411.670:6): operation="profile_load" pid=382 name=/usr/bin/evince
[  125.197338] type=1505 audit(1268651411.678:7): operation="profile_load" pid=382 name=/usr/bin/evince-previewer
[  125.201157] type=1505 audit(1268651411.682:8): operation="profile_load" pid=382 name=/usr/bin/evince-thumbnailer
[  125.210453] type=1505 audit(1268651411.690:9): operation="profile_load" pid=384 name=/usr/lib/cups/backend/cups-pdf
[  125.210910] type=1505 audit(1268651411.690:10): operation="profile_load" pid=384 name=/usr/sbin/cupsd
[  125.221263] type=1505 audit(1268651411.702:11): operation="profile_load" pid=385 name=/usr/sbin/tcpdump
[  135.211486] Adding 3004112k swap on /dev/sda5.  Priority:-1 extents:1 across:3004112k 
[  135.219557] udev: starting version 147
[  135.248977] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[  135.249003] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
[  135.258215] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  135.434815] lp: driver loaded but no devices found
[  135.442367] EXT4-fs (sda1): internal journal on sda1:8
[  135.643531] parport_pc 00:0c: reported by Plug and Play ACPI
[  135.643587] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[  135.748508] lp0: using parport0 (interrupt-driven).
[  135.826379] gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 59659kHz
[  135.908211] gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0xa400, speed 59659kHz
[  135.963086] ppdev: user-space parallel port driver
[  136.012073] ip_tables: (C) 2000-2006 Netfilter Core Team
[  136.152615] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[  136.152625]   alloc irq_desc for 18 on node -1
[  136.152628]   alloc kstat_irqs on node -1
[  136.152638] EMU10K1_Audigy 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[  136.638184] type=1505 audit(1268651423.118:12): operation="profile_replace" pid=804 name=/usr/share/gdm/guest-session/Xsession
[  136.640561] type=1505 audit(1268651423.122:13): operation="profile_replace" pid=805 name=/sbin/dhclient3
[  136.640928] type=1505 audit(1268651423.122:14): operation="profile_replace" pid=805 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[  136.641137] type=1505 audit(1268651423.122:15): operation="profile_replace" pid=805 name=/usr/lib/connman/scripts/dhclient-script
[  136.652726] type=1505 audit(1268651423.134:16): operation="profile_replace" pid=806 name=/usr/bin/evince
[  136.663697] type=1505 audit(1268651423.142:17): operation="profile_replace" pid=806 name=/usr/bin/evince-previewer
[  136.667575] type=1505 audit(1268651423.146:18): operation="profile_replace" pid=806 name=/usr/bin/evince-thumbnailer
[  136.685452] type=1505 audit(1268651423.166:19): operation="profile_replace" pid=810 name=/usr/lib/cups/backend/cups-pdf
[  136.685917] type=1505 audit(1268651423.166:20): operation="profile_replace" pid=810 name=/usr/sbin/cupsd
[  136.688587] type=1505 audit(1268651423.170:21): operation="profile_replace" pid=811 name=/usr/sbin/tcpdump
[  142.076621] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[  142.076643] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[  142.076701] pci 0000:03:00.0: putting AGP V3 device into 8x mode
[  142.320757] [drm] Setting GART location based on new memory map
[  142.320768] [drm] Loading R300 Microcode
[  142.320813] [drm] Num pipes: 1
[  142.320822] [drm] writeback test succeeded in 1 usecs
[  146.852013] eth0: no IPv6 routers present
[  157.525921] glxinfo:1601 freeing invalid memtype e0102000-e0112000
[  157.525932] glxinfo:1601 freeing invalid memtype e0112000-e0122000
[  157.525940] glxinfo:1601 freeing invalid memtype e0122000-e0132000
[  157.525948] glxinfo:1601 freeing invalid memtype e0132000-e0142000
[  157.525955] glxinfo:1601 freeing invalid memtype e0142000-e0152000
[  157.525963] glxinfo:1601 freeing invalid memtype e0152000-e0162000
[  157.525970] glxinfo:1601 freeing invalid memtype e0162000-e0172000
[  157.525978] glxinfo:1601 freeing invalid memtype e0172000-e0182000
[  157.525985] glxinfo:1601 freeing invalid memtype e0182000-e0192000
[  157.525993] glxinfo:1601 freeing invalid memtype e0192000-e01a2000
[  157.526001] glxinfo:1601 freeing invalid memtype e01a2000-e01b2000
[  157.526008] glxinfo:1601 freeing invalid memtype e01b2000-e01c2000
[  157.526016] glxinfo:1601 freeing invalid memtype e01c2000-e01d2000
[  157.526023] glxinfo:1601 freeing invalid memtype e01d2000-e01e2000
[  157.526031] glxinfo:1601 freeing invalid memtype e01e2000-e01f2000
[  157.526038] glxinfo:1601 freeing invalid memtype e01f2000-e0202000
[  157.526046] glxinfo:1601 freeing invalid memtype e0202000-e0212000
[  157.526053] glxinfo:1601 freeing invalid memtype e0212000-e0222000
[  157.526061] glxinfo:1601 freeing invalid memtype e0222000-e0232000
[  157.526068] glxinfo:1601 freeing invalid memtype e0232000-e0242000
[  157.526076] glxinfo:1601 freeing invalid memtype e0242000-e0252000
[  157.526083] glxinfo:1601 freeing invalid memtype e0252000-e0262000
[  157.526091] glxinfo:1601 freeing invalid memtype e0262000-e0272000
[  157.526099] glxinfo:1601 freeing invalid memtype e0272000-e0282000
[  157.526106] glxinfo:1601 freeing invalid memtype e0282000-e0292000
[  157.526114] glxinfo:1601 freeing invalid memtype e0292000-e02a2000
[  157.526121] glxinfo:1601 freeing invalid memtype e02a2000-e02b2000
[  157.526129] glxinfo:1601 freeing invalid memtype e02b2000-e02c2000
[  157.526136] glxinfo:1601 freeing invalid memtype e02c2000-e02d2000
[  157.526144] glxinfo:1601 freeing invalid memtype e02d2000-e02e2000
[  157.526151] glxinfo:1601 freeing invalid memtype e02e2000-e02f2000
[  157.526158] glxinfo:1601 freeing invalid memtype e02f2000-e0302000
[  199.330613] ondemand governor failed, too long transition latency of HW, fallback to performance governor
domen@domen-pc:~$

Gapi :: 15. mar 2010, 12:51

Ej en offtopic. Kako to vstavš v forum ta izpis???

Gogo :: 15. mar 2010, 12:54

Uporabiš gumb "Vstavi kodo" na začetku in koncu izpisa.

BlaY0 :: 15. mar 2010, 13:10

Saj ne bi bilo treba celotnega izpisa sem notri pastat. Razvidno je, da ti 2x resetira link na ata1 portu kjer maš en Seagate disk. Mogoče bi pomagalo, če bi forsal zadevo na UDAM66.

Gogo :: 16. mar 2010, 16:20

Ne pomaga. Nov disk bom moral iskati, ta ima tudi bad sektor. :'(

Mitja358 :: 19. mar 2010, 16:57

Pozdravljeni, da ne bom odpiral nove teme, bom kar tukaj vprašal. Imam Ubuntu 9.10 x64 v dual-bootu z Windows 7 Professional x64 in sem si danes nalagal KDE sejo in se mi je nekaj pošamerilo in ne deluje več tako kot bo moral (ubuntu). Zdaj pa me zanima nekaj.
Če formatiram Ubuntu particijo, niti v Windowse ne bom mogel ne? Če pa formatiram in naložim znova Ubuntu pa se mi sigurno vse naredi nazaj (boot izbira OS-ja) ali ne? Saj mi je izjemno pomembno, da bo šlo v Windows 7.

c0ck4m0u53 :: 19. mar 2010, 17:04

Načeloma da. Sicer pa je zagonski nalagalnik, tisti element, ki ureja in omogoča (včasih tudi z malo ročne pomoči) zagon obeh operacijskih sistemov.

Mitja358 :: 19. mar 2010, 17:07

GRUB. Vendar če samo formatiram particijo, kjer je gor Ubuntu ne bom moral niti v Windowse po moji logiki. Potrebno bo na novo naložit Ubuntu in me tukaj zanima če bo naredil oz. popravil GRUB, da bo šlo v oba.

Kako misliš z roče pomoči? Preko live distribucije? Ali že v Ubuntuju?

Zgodovina sprememb…

spremenil: Mitja358 (19. mar 2010 ob 17:08)

c0ck4m0u53 :: 19. mar 2010, 18:40

Če boš zgolj formatiral razdelek namenjen korenskemu imeniku ubuntu, boš ostal brez zagonskega nalagalnika, kar pomeni nezmožnost zagona drugega obstoječega sistema. Seveda se, da to popraviti z namestitvenim medijem od windowsow (vsaj v xp se je dalo, google how to restore windows bootloader).
V primeru, da boš ponovno nameščal tudi distribucijo linuxa pomeni, da boš s tem tudi ponovno namestil zagonski nalagalnik grub (oz. grub2 v ubuntu, če se ne motim), kar se rezultira v možnosti izbire zagona želenega operacijskega sistema.

Glede ročne pomoči, pa sem imel v mislih, da je v nekaterih primerih v grub config datoteki potrebno popraviti oz. dodati vnose tudi za druge operacijske sisteme, odvisno od tega kako ima distribucija to urejeno. Mislim, da ubuntu že samodejno doda vnose za obstoječe operacijske sisteme.

Zgodovina sprememb…

spremenil: c0ck4m0u53 (19. mar 2010 ob 18:42)

Mitja358 :: 19. mar 2010, 22:27

Hvala. Deluje ko sem samo znova naložil Ubuntu.

Pyr0Beast :: 19. mar 2010, 23:16

Linux Puppy varianta
- browser linux (samo za web) / leti ko sneta sekira

Drugace pa kakega ubuntuja gor vrzes in to je to. Ni neke hude logike potrebno odzadaj.

Some nanoparticles are more equal than others

Good work: Any notion of sanity and critical thought is off-topic in this place

cewapcic :: 20. mar 2010, 11:35

mene pa zanima zakaj imam samo na slo-techu težave s premajhno pisavo teksta, ki je v blockquotu

uporabljam ubuntu+mozilla ff
in mam v nastavitvah obkljukan: "Allow pages to choose their own fonts, instead of my selection above"

Zgodovina sprememb…

zavaroval slike: bluefish (20. mar 2010 ob 17:47)

fosil :: 20. mar 2010, 17:43

Probaj instalirat paket ubuntu-restricted-extras, ki ti instalira dodatne fonte.

Tako je!

roksson :: 20. mar 2010, 17:49

Žijo:P

sm slaboviden in pri uporabi računalnika si pomagam s temo high contrast black(pri windowsih) Ta tema mi omogoča da se komplet ozadje mojega sistema spremeni v črno in črke v svtlo barvo. Tako lahko narmalno uporabljam komp ker me čene moti svetloba.

Ko sem pa nabavil leptopa in si gor naložil ubuntu sem kontrast spremenil tudi tam a mi ga za intertet ni uspelo ali kdo ve kako bi to spremenil???

Tnx naprej.

c0dehunter :: 21. mar 2010, 13:11

Kako misliš za internet?
Spletne strani imajo vnaprej določene barvne sheme ki jih ne moreš kar univerzalno spreminjat.

I do not agree with what you have to say,
but I'll defend to the death your right to say it.

brodul :: 21. mar 2010, 15:50

Lahko se znajdes ter si namestis compiz ta ti omogoca, da vidis celotni zaslon v negativu. Mozno pa da obstaja kaksen add-on za firefox ki traslira barve.

Pretending to be a mature adult is so exhausting.

roksson :: 21. mar 2010, 16:28

c0dehunter pri win xp se je to dalo prilagodit, da so bile tudi internetne strani v negativu.

Pri ubuntutu pa hvala brodul za nasvet bom poskusil.

Če ima še kdo kak nasvet pa ga prosim da pokomentira :P

Vredno ogleda ...

	Tema	Sporočila	Ogledi	Zadnje sporočilo
	Tema	Sporočila	Ogledi	Zadnje sporočilo
»	lenovo r61 random freezing Krusell Oddelek: Pomoč in nasveti	6	829 (799)	Krusell 8. maj 2013 13:03:56
»	[Linux] Pinnaclova kartica christooss Oddelek: Operacijski sistemi	30	1769 (1524)	christooss 29. avg 2006 12:50:18
»	Linux Read only file system ?? 2g00d4u Oddelek: Operacijski sistemi	9	1540 (1499)	2g00d4u 27. sep 2005 17:14:42
»	Predolgo nalaganje kernela Senzacionale Oddelek: Operacijski sistemi	14	1402 (1278)	BigWhale 20. jun 2004 20:59:28
»	problemi z zvocno v linuxu daks Oddelek: Operacijski sistemi	8	1555 (1498)	BigWhale 4. maj 2004 13:28:05

Več podobnih tem

Forum » Operacijski sistemi » Ubuntu vprašanja

Ubuntu vprašanja