» »

problemi z zvocno v linuxu

problemi z zvocno v linuxu

daks ::

Oj
Problem je ta da je avtomaticno konfiguriralo zvocno (pise da "running") vendar zvoka ne slisim.
Pa tipkovnico tudi ne znam ustimat.Pomoje je ustimano kao angleska(mi napise y namesto z) vendar ko sem jo spremenil na slovensko ni nic drugace.

Za vso pomoc se ze vnaprej zahvaljujem

Skrat ::

Katero graficno okolje, katera distribucija, katera zvocna, kaksen zvocni sistem... ??? :|
Free software is a matter of liberty, not price.

Cr00k ::

hmm...

glede zvocne...
1. ce mas kako predpotopno... si dodaj sndconfig. Na enmu od cdjev s katerimi si instaliru Linux je gor tak rpm...

2. ce mas novejso, probi med nastavitvami prtisnt test sound gumbek... ce dela, je ok.
Ce ne bakc to 1.

3. ce ti noce spilat cd-jev poglej ce mas v pcju zvazano zvocno in cd enoto...

4. ce ti noce spilat mp3-jev, (pol mas verjetn redhat)... pejt na google pa isci xmms, pa taprvo klikn (men se ne da iskat...)

Glede tipkovnice...

probi se enkrat nardit reinstall, pa ze med instalom zber razpored tipk...

BigWhale ::

Zazrl sem se globoko v svojo kristalno kroglo in opazil....

... da ima v sredini majhno razpoko...

:(

Out Of Order

daks ::

Oj

Mam ASUS A7N8X - Deluxe Rev.2.00+.Zvocna je integrirana gor in je od nvidie.Pod sound card options mi pise da dela(running), vendar sploh ni nic slisat.

Prosim pomagajte.

Hvala

BigWhale ::

tole napisi takoj po rebootu in povej kaj dobis:

# lsmod
# lspci
# dmesg

daks ::

Oj

BigWhale pri ukazih #lsmod in #dmessg mi napise ful stvari, pri #lspci pa nic.

Kaj si na kakem irc chanellu ker ti vsega tega tu ne morem pripeti.

Hvala

daks ::

pri lsmod napise:
Module                  Size  Used by    Not tainted
snd-pcm-oss            49344   1 (autoclean)
snd-seq                41424   1 (autoclean)
snd-mixer-oss          15576   0 (autoclean) [snd-pcm-oss]
videodev                6272   0 (autoclean)
isa-pnp                32712   0 (unused)
hid                    21444   0 (unused)
ipv6                  227264  -1 (autoclean)
key                    70456   0 (autoclean) [ipv6]
snd-intel8x0           21924   5
snd-pcm                74116   0 [snd-pcm-oss snd-intel8x0]
snd-timer              17056   0 [snd-seq snd-pcm]
snd-ac97-codec         45304   0 [snd-intel8x0]
snd-page-alloc          6676   0 [snd-intel8x0 snd-pcm]
snd-mpu401-uart         4128   0 [snd-intel8x0]
snd-rawmidi            15776   0 [snd-mpu401-uart]
thermal                 6180   0 (unused)
snd-seq-device          4528   0 [snd-seq snd-rawmidi]
processor               8280   0 [thermal]
snd                    40388   4 [snd-pcm-oss snd-seq snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
fan                     1472   0 (unused)
soundcore               3940   0 [snd]
button                  2380   0 (unused)
battery                 5600   0 (unused)
ac                      1696   0 (unused)
st                     29648   0 (autoclean) (unused)
sr_mod                 14616   0 (autoclean)
sg                     35232   0 (autoclean)
keybdev                 2156   0 (unused)
mousedev                4340   1
joydev                  5440   0 (unused)
evdev                   3840   0 (unused)
input                   3488   0 [hid keybdev mousedev joydev evdev]
usb-ohci               19848   0 (unused)
ehci-hcd               18028   0 (unused)
usbcore                64364   1 [hid usb-ohci ehci-hcd]
raw1394                18288   0 (unused)
ohci1394               25808   0 (unused)
ieee1394              188260   0 [raw1394 ohci1394]
3c59x                  27024   1
ide-scsi               11056   0
scsi_mod              100788   4 [st sr_mod sg ide-scsi]
ide-cd                 32416   0
cdrom                  29216   0 [sr_mod ide-cd]
nls_iso8859-1           2844   3 (autoclean)
ntfs                   80300   3 (autoclean)
lvm-mod                64996   0 (autoclean)
ext3                   88328   2
jbd                    52448   2 [ext3]


pri dmesg pa napise

Linux version 2.4.21-99-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Wed Sep 24 13:34:32 UTC 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
501MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 Nvidia                     ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 16944.11825) @ 0x1fff74c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 00000.04096) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda8 vga=0x317 splash=silent desktop hdc=ide-scsi hdclun=0 showopts
bootsplash: silent mode.
ide_setup: hdc=ide-scsi
ide_setup: hdclun=0
Initializing CPU#0
Detected 2185.278 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4308.99 BogoMIPS
Memory: 514328k/524224k available (1739k kernel code, 9512k reserved, 605k data, 176k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=3
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4bios S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB1._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16)
ACPI: PCI Interrupt Link [APC2] (IRQs 17)
ACPI: PCI Interrupt Link [APC3] (IRQs 18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
00:00:01[A] -> IRQ 5 Mode 1 Trigger 1
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
00:00:02[A] -> IRQ 11 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
00:00:02[B] -> IRQ 12 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 12
PIC: IRQ (12) already programmed
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 12
PIC: IRQ (12) already programmed
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10
00:00:06[B] -> IRQ 10 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 11
PIC: IRQ (11) already programmed
ACPI: PCI Interrupt Link [LIDE] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
PIC: IRQ (10) already programmed
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
PIC: IRQ (5) already programmed
ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: overridden by ACPI.
PISCH: Plug In Scheduler Interface (Version 6)
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 32764
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xd0000000, mapped to 0xe0818000, size 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:5467
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture... no good signature found.
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: PCI device 10de:0065 (nVidia Corporation) (rev a2) UDMA100 controller on pci00:09.0
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y120L0, ATA DISK drive
blk: queue c03eb6c0, I/O limit 4095Mb (mask 0xffffffff)
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 213k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: cache flushing failed. disable write back cacheing for journalled file systems
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: cache flushing failed. disable write back cacheing for journalled file systems
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: PLEXTOR   Model: CD-R   PX-W4012A  Rev: 1.05
  Type:   CD-ROM                             ANSI SCSI revision: 02
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
02:01.0: 3Com PCI 3c905C Tornado 2 at 0x9000. Vers LK1.1.16
 00:26:54:12:3c:a3, IRQ 11
  product code ffff rev 00.0 date 15-31-127
  Internal config register is 1600000, transceivers 0x40.
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/MII interface.
  MII transceiver found at address 2, status 7849.
  Enabling bus-master transmits and whole-frame receives.
02:01.0: scatter/gather enabled. h/w checksums enabled
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
PCI: Setting latency timer of device 00:0d.0 to 64
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[e4084000-e40847ff]  Max Packet=[2048]
ohci1394_0: SelfID received outside of bus reset sequence
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800003493de]
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: PCI device 10de:0068 (nVidia Corporation)
ehci_hcd 00:02.2: irq 11, pci mem e482e000
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:02.2 PCI cache line size corrected to 64.
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 14:24:02 Sep 24 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe4830000, IRQ 11
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe4832000, IRQ 12
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:02.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc01b) is not claimed by any active driver.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
PCI: Setting latency timer of device 00:06.0 to 64
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb3:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux video capture interface: v1.00
eth0: no IPv6 routers present
eth0: Setting full-duplex based on MII #2 link partner capability of 45e1.
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root


pri lspci pa ne napise nic.

Hvala

BigWhale ::

odpri alsamixer ali kaj podobnega, kanali so muted.. Zato ti nic ne dela...


Vredno ogleda ...

TemaSporočilaOglediZadnje sporočilo
TemaSporočilaOglediZadnje sporočilo
»

Ubuntu vprašanja

Oddelek: Operacijski sistemi
482550 (1299) roksson
»

[Linux] Pinnaclova kartica

Oddelek: Operacijski sistemi
301481 (1236) christooss
»

Gentoo Xorg.conf LCD - sistem se obesi

Oddelek: Operacijski sistemi
361411 (1204) Mr.B
»

Predolgo nalaganje kernela

Oddelek: Operacijski sistemi
141176 (1052) BigWhale
»

Linux internet povezava problem

Oddelek: Operacijski sistemi
441652 (1267) dr.J

Več podobnih tem