Težave z resolucijo na Linux sistemu

Jaz sem imel podoben problem na centosu. Rešil sem tako da sem v nastavitvah za zaslon nastavil, da imam lcd zaslon z resolucijo 1280*1024.
lp
grega

Am, res hvala, ampak sem res "frišen" uporabnik Linux sistema, danes sem ga prvič v življenju zagnal in uporabil. Bi lahko prosim overlord natančneje opisal to stvar? Hvala

Ja, sem našel. Vpišem tisti ukaz nano /etc/X11/xorg.conf in me vrže v nek GNU nano 2.0.2. No, grem malce dol in najdem tele resolucije. Imam kar 6 tipov resolucij. Spisane so ena pod drugo in vse so enake. (hmmm kako ti opisal...) no, v glavnem, spremenim taprvi spisek resolucij, vendar sedaj nevem kako stvar shranit? Prosim pomagaj

Ja, zdej sm ugotovil, da nisem prijavljen kot root

Sem šel, vtipkal v konzoli "su". Me vpraša za password. Ko pa hočem pass vtipkat, pa se črke sploh ne prikažejo... Nakaj ni prou tle... Mogče veš za kaj gre? Namreč, le še to mi manjka, pa bom gotovo rešil stvar

Super, hvala lepa, sem rešil stvar, shranilo je, ampak še zmeraj ne prikaže "predelane" resolucije. Stvar sem celo resetiral, vendar ne spremeni resolucije. Še vedno je enaka kot prej. Imate še kakšno idejo, oz. popravek, kjer sem se jaz zmotil?

Torej celotna koda je sedaj takšna:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
BusID "PCI:2:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection





Seveda sem modificiral. Lahko vidite, kako so spremenjene resolucije, pa mi še vedno nič ne spremeni situacije...

Ja, razumem, se je tudi meni to zdelo. Sem potegnil točne gonilnike za moj komp. So .run zapisa, vendar mi vedno javi napako, češ da stvari ne morem inštalirat z določenim Encodingom. Poskusim drugega - isto, Tretji - isto. Prikateremkkoli encodingu poskusim, tam mi javi error. Uporabljam pa gedit program za odpiranje datotek,

Grafična kartica je Club 3D-jev X800RX (v glavnem od ATIJA) in Acerjev monitor LCD TFT, kateri naj bi podpiral najvišjo resolucijo 1280x1024 s 75HZ osveževanjem.