» »

ATI linux gonilnliki in resolucija

ATI linux gonilnliki in resolucija

roli ::

Včeraj sem na moj sistem Suse linux 10.0 namestil ATI gonilnike za grafično kartico (radeon 9200SE). Problem pa nastane pri resoluciji. Sam hočem imet resolucijo 1280x768 vendar je iz KDE control centra nekako izpuhtela.Kako jo dobit nazaj? Sax2 se sploh noče zagnat (yast).Po igračkanju z xorg.conf datoteko sem moral ATI driverjem pusti,da naredijo novo vendar je bilo to že po tistem,ko je resolucija izpuhtela.
http://www.r00li.com
  • spremenil: roli ()

Kami ::

Ja v xorg.conf je več ni.

Dodaj v xorg.conf pri subsection display: Modes "1024x768" "1280x768"

roli ::

Problem je,da je že tam.

# /.../
# SaX generated X11 config file
# Created on: 2006-03-18T17:06:29+0100.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#
#Section "Modes"
# Identifier "Modes[0]"
# ModeLine "1280x768" 114.5 1280 1360 1496 1712 768 769 772 806
# ModeLine "1280x768" 99.2 1280 1352 1488 1696 768 769 772 801
# ModeLine "1280x768" 84.3 1280 1344 1480 1680 768 769 772 797
# ModeLine "1024x768" 92.0 1024 1088 1200 1376 768 769 772 806
# ModeLine "1024x768" 79.5 1024 1080 1192 1360 768 769 772 801
# ModeLine "1024x768" 67.5 1024 1080 1184 1344 768 769 772 797
# ModeLine "800x600" 55.2 800 840 928 1056 600 601 604 630
# ModeLine "800x600" 47.5 800 840 920 1040 600 601 604 626
# ModeLine "800x600" 40.2 800 832 912 1024 600 601 604 623
# ModeLine "768x576" 50.6 768 808 888 1008 576 577 580 605
# ModeLine "768x576" 43.5 768 800 880 992 576 577 580 601
# ModeLine "768x576" 37.4 768 800 880 992 576 577 580 598
# ModeLine "640x480" 34.8 640 672 736 832 480 481 484 504
# ModeLine "640x480" 29.8 640 664 728 816 480 481 484 501
# ModeLine "640x480" 25.1 640 656 720 800 480 481 484 498
#EndSection

Section "ServerLayout"
Identifier "Layout[all]"
Screen 0 "aticonfig Screen 0" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
InputDevice "Mouse[5]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection

Section "Files"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection

Section "Module"
Load "type1"
Load "dbe"
Load "freetype"
Load "glx"
Load "v4l"
Load "extmod"
Load "dri"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection

Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "si"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "ImPS/2 Generic Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Mouse[3]"
Driver "wacom"
Option "Device" "/dev/input/event0"
Option "InputFashion" "Tablet"
Option "Mode" "Absolute"
Option "Name" "GRAPHIRE-3 CLASSIC (USB)"
Option "SendCoreEvents" "on"
Option "Tilt" "on"
Option "Type" "cursor"
Option "USB" "on"
Option "Vendor" "WACOM"
EndSection

Section "InputDevice"
Identifier "Mouse[5]"
Driver "wacom"
Option "Device" "/dev/input/event0"
Option "InputFashion" "Pen"
Option "Mode" "Absolute"
Option "Name" "GRAPHIRE-3 CLASSIC Stylus (USB)"
Option "Protocol" "Auto"
Option "SendCoreEvents" "on"
Option "Tilt" "on"
Option "Type" "stylus"
Option "USB" "on"
Option "Vendor" "WACOM"
EndSection

Section "Monitor"
Identifier "aticonfig Monitor 0"
EndSection

Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection
http://www.r00li.com

Brane2 ::

V section "Screen" vnesi ločljivosti.

Pri meni so videti takole:


SubSection "Display"
Depth 16
Modes "1600x1200" "1024x768" "800x600"
ViewPort 0 0
EndSubsection



SubSection "Display"
Depth 24
Modes "1600x1200" "1024x768" "800x600"
ViewPort 0 0
EndSubsection




Vnesi jih za vsako barvno globino, ki jo želiš imeti na razpolago, posebej. Jaz sem, kot vidiš, vnesel samo 16 in 24 bp, pri vsaki od teh pa tri ločljivosti. Prva je default ( če monitor dovoljuje), pri meni tporej 1600x1200. Ti si stvari seveda nastavi po svoji meri...
On the journey of life, I chose the psycho path.

roli ::

Sem naredil kot si rekel vendar je avtomatsko preklopil na 1024x768.Problem je,da monitor sam ne podpira te resolucije in ga vrže nazaj.Windowsi mu vsilijo to resolucijo in prav tako so to naredili gonilniki vgrajeni v suse.VEndar sem moral v sax2 odkljukat "prikaži le resolucije,ki jih monitor podpira"(nekaj takega).Problem je,da jaz sax2 ne morem zagnat.Če bi vedel kako nazaj dobit sax2,stare nastavitve bi takoj odstranil ATIjeve gonilnike.Če pa to storim sedaj pa error no screens found:D .Ve kdo kako dobit stare Suse gonilnike nazaj?
http://www.r00li.com

Brane2 ::

Poglej v/etc/X11 Če je tam kaj PODOBNEGA xorg.conf, zna biti,da gre za backup kopijo...


Sicer pa naj bi imel nekakšen utility XF86Config ali nekaj podobnega, a katerim naj bi lahko ročno nastavil X-e, vsaj grobem...
On the journey of life, I chose the psycho path.

Brane2 ::

Ti pri monitorju sploh nimaš navedenih scan frekvenc.

Kaj maš to za eno zadevo ? LCD ?
On the journey of life, I chose the psycho path.

64202 ::

> Ve kdo kako dobit stare Suse gonilnike nazaj?

sax2 -m 0=radeon

ako me spomin ne vara
I am NaN, I am a free man!

roli ::

Ne je 19" CRT zaslon.

Bom poizkusil tole ju3.
http://www.r00li.com

Brane2 ::

Poglej, če se naloži "Edid" ali "Esid" modul ob štartu Xov in če stvar zazna zmogljivosti monitorja.

V nasprotnem primeru boš moral v sekciji Monitor nastaviti odklonske frekvence v stilu:

VertRefresh "50-120"
HorizSync "31.5-90

seveda ne prepisuj teh številk kar tako na pamet. Prej preveri, kaj tvoj monitor zmore. (Google)
On the journey of life, I chose the psycho path.

roli ::

Kolikor vem se tole vpisuje v Sax2,ki pa se noče zagnat.

Poglej, če se naloži "Edid" ali "Esid" modul ob štartu Xov in če stvar zazna zmogljivosti monitorja.

In kako se to pogleda?
http://www.r00li.com

Brane2 ::

Poglej v logfile Xov. Ponavadi je to v /var/log/Xorg.log
On the journey of life, I chose the psycho path.

roli ::

@64202: Hvala dela sedaj!

Stara resolucija je nazaj tako kot mora bit.

Sax2 mi monitor pravilno prepozna kot TATUNG.... Vendar jaz vedno spremenim v VESA 1280x960 in potem nastavim resolucijo na 1280x768.Potem nastavim še KDE pa je vse tako kot mora bit.
http://www.r00li.com


Vredno ogleda ...

TemaSporočilaOglediZadnje sporočilo
TemaSporočilaOglediZadnje sporočilo
»

radeon 9200 suse10 brightness problem

Oddelek: Operacijski sistemi
251961 (1777) roli
»

suse 9.1 in radeon 9800PRO

Oddelek: Operacijski sistemi
111737 (1609) jurre
»

Linux / ATI Radeon / problem z driverji

Oddelek: Operacijski sistemi
131759 (1576) ahac
»

Suse 8.2 težave z grafično...

Oddelek: Operacijski sistemi
91803 (1691) norvalk
»

Linux in kWord

Oddelek: Programska oprema
111679 (1526) Gh0st

Več podobnih tem