GeForce 6600GT pasivno hlajenje?

Zanima me če je možno to kartico ohlajati pasivno in če kakšna rebra pašejo gor pa kok če sploh se jo da navit?

GeForce 6600GT

Če je odgovor na to vprašanje negatven me pa zanima katera grafična je najmočnejša pa se jo še da ohlajati pasivno.

Asus6600GT

Nekje sem bral (ne vem več točno kje), da je tole draga verzija 6600GT ki se po vrhu vsega še precej greje. Je pa res da je pole Gainwardove edina z 256 MB RAMa (AFAIK).

Heat Pipe "sendviči" ala Zalman 80D, TT Schooner itn.

no jest mam zalman 80hd
rebra so bakrena in imajo ksn epol kile z njimi sm zelo zadovoln

ja, najbrž je to ta....

zdravo...sirotka tukej...
am bios morš zmodat..da ti bo kazal temperazuro.. am core maš 500? k ni 450? dub si nibitor program...še prej pa bios shran od grafe in ga potem nalož v nibitor in temp. mod za 6600 najd. Potem obkluki, pa shran pod drugim imenom..pol pa sm še nalož bios v dosu...drugač pa je še ena šansa, da pač shranš bios in ga potem z hex editorjem modificeraš.tle maš postopek(če nisi siguren, mi pošlji bios prek pm...pa ti bom jst spremenu, al ti pa mojga pošlem, sm jst mam core 450 pa mem 500 in hynix rame):

Step 1: Create a bootable floppy with Nvflash included.

1. Download this boot disk image.

2. Launch the program and insert a floppy into drive A: it will now write the image to the floppy.

3. Download NVflash.

4. Put Nvflash.exe and Cwsdpmi.exe onto the boot disk you’ve just created.

Step 2: Save that BIOS!

1. With the floppy you created still in your drive, restart your computer and let it boot off of the floppy.

2. Type “Nvflash –b biosbackup.rom” (without quotes) and hit ‘enter’.

3. Nvflash will now save your bios to the floppy.

4. When it’s done, remove the floppy and restart your computer.


Step 3: Edit the BIOS.

1. Download a hex editor, I prefer Hextreme.

2. Launch the editor insert your boot disk once again. Browse to the floppy, you should find a file called “biosbackup.rom”, open it.

3. Search for “04031201” (make sure you are in Hex mode, click the dropdown menu next to the binoculars and select “HEX”), right after that sequence you should see “10 0A 01 11”. Highlight the “10” in the string and change it to “00” so it looks like this, “00 0A 01 11”

4. Save the edited bios to your floppy. Be sure to save it as something different then the original (we want to keep the original intact incase something goes wrong). To keep things simple, save it as “Biosmod.rom”.

Step 4: Flash your card with the edited BIOS.

1. With the floppy you created still in your drive, restart your computer and let it boot off of the floppy.

2. Type "nvflash -5 -6 biosmod.rom” (without quotes) and hit ‘enter’.

Nvflash will now flash your cards BIOS. When it’s done, remove the floppy and restart your computer.


Congratulations! You should now be able to monitor the temperature of your Nvidia GeForce 6600.


Special thanks goes to Mgaroz, for bravely being my guinea pig and discovering problems with my guide, and then coming up with solutions for them. Thanks again Mgaroz! thumbup.gif


Really discouraging disclaimer:

Do this at your own risk, I cannot be held responsible for anything that happens to your card and/or computer!

to je 6600GT, samo vpisani so pol 6600... Max oc ramov na navadni se mi zdi da je neki čez 800