Išče se koda za univerzalnega daljinca

Jaz sem imel tudi probleme pri iskanju kode. No, potem sem prebral navodila

Univerzalni daljinec ima tudi opcijo, da sam prečekira vse žive spektre signalov, ki jih ima v spominu. Postopek je sledeč: prižgeš TV, pol držiš en gumb nekaj časa in daljinec pošlje signal za ugasnitev TV-ja, vsakič za različni model. Potem čakaš nekaj časa, in ko se TV ugasne, pritisneš en gumb na daljincu in to je to....

Automatic code search
Your remote control finds the correct settings
almost automatically in seconds:
1. Switch on the appliance to be controlled so
that you can watch a TV program.
2. To start the code search, press the SET
button, and then additionally the appliance
button e.g. TV or DVB, for more than 3
seconds until the Power-key lamp (LED) starts
to blink.
3. Then point the remote control at the
appliance to be controlled while the remote
control emits a different ON/OFF signal every
2 seconds.
4. When your appliance reacts, press any
button, except SET, to end the search. – If you
ended the search too late, continue to search
using the Manual Code Search (see above).
5. Finally, test the control code setting by
trying to control your appliance. If it does not
work correctly, please try the code search
again. The code search then begins with the
next code in the sequence. - Remember to
switch your appliance back on again if you
wish to continue searching.