Pekač in UDMA2

Pekača imam na secondary master in mi deluje na Multi-Word DMA Mode 2, namesto na Ultra DMA Mode 2.
V biosu in v windowsih imam vklopljen UDMA, na pekaču imam najnovejši Firmware, kabel imam 80 pinski, nove Via 4in1 driverje.
Probal sem:
-v Device Managerju sem odstranil Sekundary IDE Channel
-In še eno varianto iz Slo-Techa:
If you have problems with Ultra DMA settings for devices in Windows 2000 or XP:


HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96A-E325-11CE-BFC1-08002BE10318}\000x

Last four digits are likely 0001, 0002. Under those keys you will find
MasterIdDataChecksum, SlaveIdDataChecksum.
Delete the value corresponding to your drive. It will make the OS to redetect the device
DMA capabilities after reboot.

Kaj še lahko poskusim?

zakaj pa pol v specifikacijah piše, da podpira UltraDma2

No ja. Jaz imam cdrom in pekač na ata-33

neki123: Ne dela mi hitreje kot 33.3 MB/s, ampak na 16.6 MB/s (Multi-Word DMA Mode 2)


TrOn: Imam Lite-On LTR 52246S 52/24/52, dela pa na Multi-Word DMA Mode 2, to je 16.6 MB/s, namesto na ATA33(33.3 MB/s)

Jah, potem pac pekac ne podpira taksnega prenosa :).