levicom napajalnik

Mislim, da je bil test na THG. In pa, dej nam povej amperaže na 3.3 in 5 V.

Pred časom so na THG (tomshardware.com) stestirali goro napajalnikov. In v njihov search (articles ali nekaj takega) vpišeš ime tvoje trafe. Če ga niso, ga pač niso, ne?

Glede specifikacij. Daj potrudi se in nam napiši kolk ima A na 3.3V in 5V. To _mora_ pisat na njihovi strani.

Ja pa še to. Mogoče se ti splača vzeti levicom 450W, ki je cc 20 eurov dražji.

napetosti tega:
+ 3,3 Volt 35 A
+ 5,0 Volt 37 A
+ 12,0 Volt 17 A

ker se na napetosti in ampere ne spoznam dovolj,mi samo še povejte če so ti amperi ok za te napetosti,za tega 420W napajača.gor bom priključo ECS ks5a,1,3GHZ duron,volcano7+,wd 80GB disk,en cd-rw,disketnik in 9500pro.kasneje bom zamenjo proc z 2000+ in ddr rami.kolko sem vido tisti test na toms hardweru,bi levicom mogo mojo konfiguracijo brez problema napunit.

Chieftech jasno. Pa še ta ti bo čez glavo zadosti. Jasno če so to tapravi wati in ne kaki "kitajski"

What is the PFC?
(Power Factor Correction)

Many loads are highly inductive, such a lightly loaded motors and illumination transformers and ballasts. You may want to correct the power factor by adding parallel capacitors. You can also add series capacitors to "remove" the effect of leakage inductance that limits the output current.(Jim Lux -2002).

Non-PFC offers around 0.5~0.6 PF (Power Frequency), 40%~50% power lost.

Active PFC provides more efficient PF(Power Frequency), 0.95~0.99, it means only 1%~5% power has gone.

Passive PFC provides 0.70~0.80 PF(Power Frequency), it means 30%~20% power has gone.
upam da razumeš